Nivelmap
EN

Aughnagross water level

River gauge, Multeen, Tipperary, Ireland

Directions

Right now

Within the normal range

Water level

0.13m Steady over the last 24 hours

0 1 2 Highest onrecord 1.93 m

History

History
0.120.14mOct 16Oct 16Oct 16Oct 16Oct 17Bottom of normal range0.120.14mOct 16Oct 16Oct 17Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

The Multeen at Aughnagross is at 0.13 m, within its typical range.

The usual range here runs from 0.10 m to 0.69 m.

The level has held steady over the past 24 hours. In the last month it has stayed between 0.13 m and 0.14 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.10 m – 0.69 m
Highest on record
1.93 m

Fishing and paddling

Paddlers and anglers can expect the river much as they know it, though a heavy shower upstream can change that within hours.

Flood alerts and warnings come from the OPW and Met Éireann.

Weather at the gauge

Rain in the last 3 days: 11 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° -1° – Wind 10 km/h
18 Sun 12° 0° – Wind 9 km/h
19 Mon 13° 3° – Wind 16 km/h
20 Tue 13° 7° 2.3 mm, 63% Wind 23 km/h
21 Wed 10° 5° 21 mm, 54% Wind 39 km/h
22 Thu 11° 2° 0.3 mm, 52% Wind 24 km/h
23 Fri 8° 3° 34 mm, 72% Wind 44 km/h

Forecast: Open-Meteo

Sunrise 08:01 AM Sunset 06:35 PM Daylight 10 hr, 34 min First quarter 38%

Map

Other gauges on the Multeen

Gauge Level Compared with normal 24 hours Distance
BallinacloghRiver gauge, Multeen 0.49 m Normal −0.01 m 0.7 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
New Bridge SuirRiver gauge, Suir 0.27 m Normal +0.01 m 7.2 km
KillardryRiver gauge, Aherlow 0.36 m Normal −0.01 m 12 km
RathkennanRiver gauge, Clodiagh 0.31 m Normal −0.01 m 13 km
BeakstownRiver gauge, Suir 0.33 m Normal ±0 17 km
Caher ParkRiver gauge, Suir 0.28 m Normal −0.03 m 19 km
New Bridge BilboaEstuary gauge, Bilboa 0.98 m Normal ±0 22 km
ThurlesRiver gauge, Suir 0.30 m Normal ±0 22 km
SunvilleRiver gauge, Dead 0.73 m Normal −0.03 m 22 km

Questions and answers

What is the typical range for the Multeen at Aughnagross?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.10 m to 0.69 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.13 m on the gauge does not mean the water is that deep.

What is the water level of Aughnagross today?

On 17 Oct 2026, 08:45 GMT+1, the water level was 0.13 m. Steady over the last 24 hours.

Is Aughnagross rising or falling?

Steady over the last 24 hours.

Is the level of Aughnagross normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Aughnagross?

The highest level on record is 1.93 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:16005 (Agency page)
Coordinates
52.52350, -8.01406 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
67.824 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.13 m 2026-10-17 07:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Aughnagross (opw:16005). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/tipperary/aughnagross

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.