Canada
United States
Belgium
France
Ireland
Netherlands
United Kingdom
Austria
Czechia
Germany
Poland
Slovenia
Switzerland
Italy
Spain
Türkiye
Denmark
Finland
Norway
SwedenClonsingle Bridge water level
Estuary gauge, Annagh, Tipperary, Ireland
Right now
Within the normal range
Water level
History
What this means
The gauge at Clonsingle Bridge reads 0.35 m, a normal level.
The usual range here runs from 0.26 m to 0.76 m.
The level is falling, down 0.03 m over the past 24 hours. Over the past 30 days it has moved between 0.35 m and 0.38 m.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- 0.26 m – 0.76 m
- Highest on record
- 3.01 m
Weather at the gauge
Rain in the last 3 days: 10 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Waterpark BridgeEstuary gauge, Newport | 0.45 m | Normal | −0.04 m | 2.5 km |
| BallymackeoghRiver gauge, Mulkear | 0.24 m | Normal | −0.03 m | 2.5 km |
| Barrington's BridgeRiver gauge, Newport | 0.56 m | Normal | −0.06 m | 5.3 km |
| AbingtonRiver gauge, Mulkear | 0.28 m | Normal | −0.04 m | 6.0 km |
| AnnacottyRiver gauge, Mulkear | 0.51 m | Normal | −0.05 m | 6.8 km |
| Groody BridgeRiver gauge, Groody | 0.76 m | Normal | −0.08 m | 10 km |
| New Bridge BilboaEstuary gauge, Bilboa | 0.95 m | Normal | −0.03 m | 13 km |
| SunvilleRiver gauge, Dead | 0.71 m | Normal | −0.05 m | 13 km |
Questions and answers
What is the typical range for the Annagh at Clonsingle Bridge?
The Office of Public Works (waterlevel.ie) gives a typical range of 0.26 m to 0.76 m for this gauge.
What is the water level of Clonsingle Bridge today?
On 17 Oct 2026, 14:30 GMT+1, the water level was 0.35 m. Down 0.03 m over the last 24 hours.
Is Clonsingle Bridge rising or falling?
Down 0.03 m over the last 24 hours.
Is the level of Clonsingle Bridge normal?
Within the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Clonsingle Bridge?
The highest level on record is 3.01 m.
How often is this data updated?
The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
Where does this data come from?
The values come directly from the Office of Public Works (waterlevel.ie), the official operator of this gauge, and are published under CC BY 4.0. We do not estimate or model live values.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Office of Public Works (waterlevel.ie)
- Station code
opw:25309(Agency page)- Coordinates
52.68508, -8.43199(WGS84)- Vertical datum
- OD Malin Head OSGM15
- Gauge zero
- 32.146 m
- Update interval
- every 15 minutes
- Licence
- CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 0.35 m | 2026-10-17 13:30 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Office of Public Works (waterlevel.ie): Clonsingle Bridge (opw:25309). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/tipperary/clonsingle-bridge
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer