Nivelmap
EN

Inch Bridge Claureen water level

River gauge, Claureen, Clare, Ireland

Directions

Right now

Within the normal range

Water level

0.32m Down 0.05 m over the last 24 hours

0 1 2 Highest onrecord 2.19 m

History

History
0.320.340.36mOct 16Oct 16Oct 16Oct 17Oct 170.320.340.36mOct 16Oct 16Oct 17
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Inch Bridge Claureen reads 0.32 m, a normal level.

The usual range here runs from 0.14 m to 0.74 m.

The level is falling, down 0.05 m over the past 24 hours. Over the past 30 days it has moved between 0.32 m and 0.39 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.14 m – 0.74 m
Highest on record
2.19 m

On the river at Inch Bridge Claureen

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the OPW and Met Éireann.

Weather at the gauge

Rain in the last 3 days: 19 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° 3° – Wind 10 km/h
18 Sun 12° 1° – Wind 7 km/h
19 Mon 13° -2° – Wind 9 km/h
20 Tue 14° 5° 5.1 mm, 50% Wind 21 km/h
21 Wed 11° 6° 20 mm, 65% Wind 39 km/h
22 Thu 11° 5° 2.4 mm, 58% Wind 23 km/h
23 Fri 8° 5° 29 mm, 86% Wind 46 km/h

Forecast: Open-Meteo

Sunrise 08:06 AM Sunset 06:39 PM Daylight 10 hr, 33 min First quarter 39%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Victoria BridgeEstuary gauge, Fergus 1.64 m Normal −0.02 m 4.0 km
BallycoreyRiver gauge, Fergus 1.09 m Normal ±0 6.5 km
CarnellyRiver gauge, Manus 0.32 m Normal ±0 6.9 km
Corrofin FergusRiver gauge, Fergus 1.12 m Normal −0.05 m 13 km
Owenogarney Railway BridgeRiver gauge, Owenogarney 0.80 m Normal −0.01 m 21 km
EnnistimonRiver gauge, Inagh 0.63 m Normal −0.05 m 21 km
Gort 1BTidal gauge, Stream 0.42 m Normal −0.01 m 28 km
PoulataggleTidal gauge, Stream 0.35 m Normal ±0 28 km

Questions and answers

What is the typical range for Inch Bridge Claureen?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.14 m to 0.74 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.32 m on the gauge does not mean the water is that deep.

What is the water level of Inch Bridge Claureen today?

On 17 Oct 2026, 12:00 GMT+1, the water level was 0.32 m. Down 0.05 m over the last 24 hours.

Is Inch Bridge Claureen rising or falling?

Down 0.05 m over the last 24 hours.

Is the level of Inch Bridge Claureen normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Inch Bridge Claureen?

The highest level on record is 2.19 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:27001 (Agency page)
Coordinates
52.82529, -9.03624 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
9.566 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.32 m 2026-10-17 11:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Inch Bridge Claureen (opw:27001). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/clare/inch-bridge-claureen

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.