Nivelmap
EN

Ahascragh Pump Hse water level

River gauge, Bunowen, Galway, Ireland

Directions

Right now

Within the normal range

Water level

0.89m Down 0.02 m over the last 24 hours

1 2 Highest onrecord 2.42 m

History

Not enough readings for a chart yet. History builds up with every update.

What this means

The gauge at Ahascragh Pump Hse reads 0.89 m, a normal level.

The usual range here runs from 0.39 m to 1.21 m.

The level is falling, down 0.02 m over the past 24 hours.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.39 m – 1.21 m
Highest on record
2.42 m

On the river at Ahascragh Pump Hse

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the OPW and Met Éireann.

Weather at the gauge

Rain in the last 3 days: 9.7 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° -1° – Wind 10 km/h
18 Sun 13° -1° – Wind 7 km/h
19 Mon 12° -1° – Wind 14 km/h
20 Tue 14° 7° 11 mm, 69% Wind 28 km/h
21 Wed 11° 7° 3.3 mm, 56% Wind 27 km/h
22 Thu 11° 4° 3.2 mm, 85% Wind 17 km/h
23 Fri 10° 3° 0.6 mm, 73% Wind 27 km/h

Forecast: Open-Meteo

Sunrise 08:06 AM Sunset 06:33 PM Daylight 10 hr, 27 min First quarter 48%

Map

Other gauges on the Bunowen

Gauge Level Compared with normal 24 hours Distance
Bunowen BridgeRiver gauge, Bunowen 1.16 m Normal −0.05 m 7.0 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
DerrycahillRiver gauge, Suck 1.18 m Normal +0.10 m 6.3 km
BellagillRiver gauge, Suck 1.26 m Normal +0.09 m 7.0 km
Deerpark BridgeRiver gauge, Derrymullan Stream 0.21 m Normal ±0 7.6 km
Ballinasloe Rail StationRiver gauge, Derrymullen Stream 0.35 m Normal −0.03 m 8.8 km
Ballinasloe Old ChannelRiver gauge, Suck 0.61 m Normal ±0 10 km
Ballinasloe TownRiver gauge, Suck 1.00 m Normal +0.07 m 10 km
BallinamoreRiver gauge, Shiven 1.14 m Normal −0.31 m 11 km
LysterfieldRiver gauge, Stream 0.18 m Normal −0.01 m 19 km

Questions and answers

What is the typical range for the Bunowen at Ahascragh Pump Hse?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.39 m to 1.21 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.89 m on the gauge does not mean the water is that deep.

What is the water level of Ahascragh Pump Hse today?

On 16 Oct 2026, 22:45 GMT+1, the water level was 0.89 m. Down 0.02 m over the last 24 hours.

Is Ahascragh Pump Hse rising or falling?

Down 0.02 m over the last 24 hours.

Is the level of Ahascragh Pump Hse normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Ahascragh Pump Hse?

The highest level on record is 2.42 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:26140 (Agency page)
Coordinates
53.39264, -8.33100 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
45.592 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.89 m 2026-10-16 21:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Ahascragh Pump Hse (opw:26140). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/ireland/galway/ahascragh-pump-hse

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.