Nivelmap
EN

Bunowen Bridge water level

River gauge, Bunowen, Galway, Ireland

Directions

Right now

Within the normal range

Water level

1.20m Up 0.02 m over the last 24 hours

1 2 Highest onrecord 2.03 m

History

History
1.201.211.22mOct 16Oct 16Oct 16Oct 17Oct 171.201.211.22mOct 16Oct 16Oct 17
Water level Top of normal rangeBottom of normal range

What this means

Water levels are unremarkable at Bunowen Bridge, where the gauge shows 1.20 m.

The usual range here runs from 0.27 m to 1.65 m.

It is on the way up, by 0.02 m over the past 24 hours. The 30-day range is 1.18 m – 1.22 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.27 m – 1.65 m
Highest on record
2.03 m

For anglers and canoeists

This is an ordinary level for the river: most put-ins, beats and weirs behave as they usually do.

Many angling and canoe clubs check gauges like this one before heading out.

Weather at the gauge

Rain in the last 3 days: 9.5 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° 0° – Wind 9 km/h
18 Sun 12° 0° – Wind 6 km/h
19 Mon 12° 1° – Wind 13 km/h
20 Tue 14° 7° 1.0 mm, 43% Wind 24 km/h
21 Wed 10° 6° 22 mm, 47% Wind 34 km/h
22 Thu 10° 4° 1.8 mm, 54% Wind 21 km/h
23 Fri 8° 5° 22 mm, 80% Wind 44 km/h

Forecast: Open-Meteo

Sunrise 08:04 AM Sunset 06:35 PM Daylight 10 hr, 31 min First quarter 41%

Map

Other gauges on the Bunowen

Gauge Level Compared with normal 24 hours Distance
Ahascragh Pump HseRiver gauge, Bunowen 0.89 m Normal −0.02 m 7.0 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Deerpark BridgeRiver gauge, Derrymullan Stream 0.21 m Normal ±0 1.4 km
BellagillRiver gauge, Suck 1.24 m Normal +0.16 m 1.6 km
Ballinasloe Rail StationRiver gauge, Derrymullen Stream 0.35 m Normal −0.04 m 1.9 km
Ballinasloe Old ChannelRiver gauge, Suck 0.61 m Normal ±0 3.2 km
Ballinasloe TownRiver gauge, Suck 0.98 m Normal +0.09 m 3.5 km
DerrycahillRiver gauge, Suck 1.16 m Normal +0.14 m 9.1 km
Raherbeg Rail BridgeRiver gauge, Suck 2.07 m Normal +0.13 m 14 km
ShannonbridgeRiver gauge, Shannon 2.57 m Normal +0.11 m 16 km

Questions and answers

What is the typical range for the Bunowen Bridge?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.27 m to 1.65 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 1.20 m on the gauge does not mean the water is that deep.

What is the water level of Bunowen Bridge today?

On 17 Oct 2026, 16:15 GMT+1, the water level was 1.20 m. Up 0.02 m over the last 24 hours.

Is Bunowen Bridge rising or falling?

Up 0.02 m over the last 24 hours.

Is the level of Bunowen Bridge normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Bunowen Bridge?

The highest level on record is 2.03 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:26358 (Agency page)
Coordinates
53.35050, -8.25334 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
37.658 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 1.20 m 2026-10-17 15:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Bunowen Bridge (opw:26358). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/galway/bunowen-bridge

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.