Nivelmap
EN

Salt River below Stewart Mountain Dam water level

River gauge, Salt River, Arizona, United States

Directions

Right now

Low for mid-October

Water level

2.76ft Steady over the last 24 hours

Flow
41.6 cfs
1 3 4 5

History

History
2.762.772.782.79ftOct 16Oct 16Oct 17Oct 18Oct 192.762.772.782.79ftOct 16Oct 17Oct 19
Water level

What this means

The Salt River below Stewart Mountain Dam is running below normal at 2.76 ft.

It has barely moved over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. In the last month it has stayed between 2.76 ft and 2.81 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Salt River below Stewart Mountain Dam

Low water exposes gravel bars that make good wading access, but some boat ramps may be left high and dry.

Weather at the gauge

The forecast is not available right now.

Sunrise 06:35 AM Sunset 05:49 PM Daylight 11 hr, 14 min First quarter 56%

Map

Other gauges on the Salt River

Gauge Level Compared with normal 24 hours Distance
Salt River near ChrysotileRiver gauge, Salt River 2.23 ft Below flood stage −0.08 ft 64 mi
Salt River near RooseveltRiver gauge, Salt River 7.00 ft Below flood stage −0.21 ft 38 mi
Salt River at Priest Drive near PhoenixRiver gauge, Salt River 1.59 ft Below flood stage −0.09 ft 24 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Verde River near ScottsdaleRiver gauge, Verde River 723 cfs High +17.0 cfs 5.4 mi
Sycamore Creek near Fort McDowellRiver gauge, Sycamore Creek 1.80 ft Below flood stage ±0 10 mi
Verde River below Bartlett DamRiver gauge, Verde River 1,010 cfs Very high +92.0 cfs 18 mi
Cave Creek below Cottonwood Creek near Cave CreekRiver gauge, Cave Creek 2.64 ft Below flood stage ±0 32 mi
Tonto Creek above Gun Creek, near RooseveltRiver gauge, Tonto Creek 2.38 ft Below flood stage −0.08 ft 33 mi
Pinto Creek near MiamiRiver gauge, Pinto Creek 0.4 cfs Low +0.3 cfs 34 mi
Pinto Creek below Haunted Canyon near MiamiRiver gauge, Pinto Creek 1.4 cfs Very high ±0 34 mi
Pinto Creek above Haunted Canyon near MiamiRiver gauge, Pinto Creek 0.4 cfs High ±0 35 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Salt River below Stewart Mountain Dam today?

On Oct 18, 2026, 09:00 PM MST, the water level was 2.76 ft. Steady over the last 24 hours.

Is Salt River below Stewart Mountain Dam rising or falling?

Steady over the last 24 hours.

Is the level of Salt River below Stewart Mountain Dam normal?

Low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:09502000 (Agency page)
Coordinates
33.55284, -111.57654 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 2.76 ft 2026-10-19 04:00 Provisional
Flow 41.6 cfs 2026-10-19 04:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Salt River below Stewart Mountain Dam (usgs:09502000). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-states/arizona/salt-river-below-stewart-mountain-dam

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.