Nivelmap
EN

Big Quilcene River below Diversion near Quilcene water level

River gauge, Big Quilcene River, Washington, United States

Directions

Right now

Very low for mid-October

Water level

0.97ft Steady over the last 24 hours

Flow
26.1 cfs
-1 0 1 3

History

History
0.970.980.98ftOct 16Oct 16Oct 17Oct 18Oct 190.970.980.98ftOct 16Oct 17Oct 19
Water level

What this means

Low water at Big Quilcene River below Diversion near Quilcene: the gauge reads 0.97 ft, far below normal for mid-October.

The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. The 30-day range is 0.95 ft – 0.99 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.

Compared with 5 years of daily readings for this time of year. How to read levels

Paddling and fishing conditions

At low levels, plan for shorter paddling trips and expect to walk your boat through a few shoals.

Weather at the gauge

No rain in the last 3 days.

19 Mon 53° 40° – Wind 8 mph
20 Tue 63° 48° – Wind 9 mph
21 Wed 62° 47° – Wind 7 mph
22 Thu 56° 43° – Wind 5 mph
23 Fri 49° 40° 0.00 in Wind 5 mph
24 Sat 55° 40° – Wind 5 mph
25 Sun 59° 43° – Wind 5 mph

Forecast: Open-Meteo

Sunrise 07:37 AM Sunset 06:18 PM Daylight 10 hr, 40 min First quarter 61%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Duckabush River near BrinnonRiver gauge, Duckabush River −0.01 ft Very low −0.01 ft 7 mi
Dungeness River near SequimRiver gauge, Dungeness River 2.14 ft Very low ±0 17 mi
Nf Skokomish River below Staircase Rpds near HoodsportRiver gauge, Nf Skokomish River 2.79 ft Normal −0.01 ft 25 mi
Nf Skokomish River near Lower Cushman Dam near PotlatchRiver gauge, Nf Skokomish River 208 cfs Normal +2.0 cfs 29 mi
Huge Creek near WaunaRiver gauge, Huge Creek 1.24 ft Normal +0.01 ft 30 mi
Elwha River at McDonald Branch near Port AngelesRiver gauge, Elwha River 8.91 ft Very low −0.01 ft 34 mi
South Fork Skokomish River near UnionRiver gauge, South Fork Skokomish River −0.03 ft Very low ±0 34 mi
North Fork Skokomish River near PotlatchRiver gauge, North Fork Skokomish River 2.94 ft Normal ±0 34 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Big Quilcene River below Diversion near Quilcene today?

On Oct 19, 2026, 11:30 AM PDT, the water level was 0.97 ft. Steady over the last 24 hours.

Is Big Quilcene River below Diversion near Quilcene rising or falling?

Steady over the last 24 hours.

Is the level of Big Quilcene River below Diversion near Quilcene normal?

Very low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:12052210 (Agency page)
Coordinates
47.78451, -122.97958 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.97 ft 2026-10-19 18:30 Provisional
Flow 26.1 cfs 2026-10-19 18:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Big Quilcene River below Diversion near Quilcene (usgs:12052210). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-states/washington/big-quilcene-river-below-diversion-near-quilcene

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.