Luce Brook below Tinto Pond water level
River gauge, Luce Brook, Newfoundland and Labrador, Canada
Right now
Very low for mid-October
Water level
- Flow
- 0.59 m³/s
History
What this means
Luce Brook below Tinto Pond is running far below normal at 1.37 m.
The median for mid-October is 1.44 m, based on 15 years of readings, so the water level is 0.07 m below typical.
It has barely moved over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. In the last month it has stayed between 1.20 m and 1.41 m.
Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.
Compared with 15 years of daily readings for this time of year. How to read levels
Key numbers
- Median for this date
- 1.44 m0.07 m below the median for this date
- Normal for this date
- 1.39 m – 1.50 m8 years in 10 fall in this range (15 years of records)
On the river
Outside the spring freshet, most rivers settle into a gentler pattern, broken by storms.
Flood advisories come from the provincial river forecast centre.
Weather at the gauge
Rain in the last 3 days: 8.2 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Wabush Lake at Dolomite RoadLake, Wabush Lake | 1.43 m | Normal | −0.03 m | 2.6 km |
| Dumbell Stream above Dumbell LakeRiver gauge, Dumbell Stream | 0.88 m | Low | +0.03 m | 2.9 km |
| Flora Creek below Trans Labrador HighwayRiver gauge, Flora Creek | 1.24 m | Normal | −0.01 m | 3.8 km |
| Pumphouse Stream above Drum LakeRiver gauge, Pumphouse Stream | 0.04 m³/s | High | ±0 | 5.4 km |
| Wabush Lake at Lake OutletLake, Wabush Lake | 2.80 m | Normal | ±0 | 19 km |
Questions and answers
What is a normal level for Luce Brook below Tinto Pond in mid-October?
The median for mid-October is 1.44 m. In 8 years out of 10 the reading falls between 1.39 m and 1.50 m, based on 15 years of records.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 1.37 m on the gauge does not mean the water is that deep.
What is the water level of Luce Brook below Tinto Pond today?
On Oct 18, 2026, 06:25 PM ADT, the water level was 1.37 m. Steady over the last 24 hours.
Is Luce Brook below Tinto Pond rising or falling?
Steady over the last 24 hours. Down 0.02 m over the last 7 days.
Is the level of Luce Brook below Tinto Pond normal?
Very low for mid-October. Compared with 15 years of daily readings for this time of year.
How often is this data updated?
Environment and Climate Change Canada – Water Survey of Canada publishes a new reading every hour. This page refreshes within minutes of each update.
Where does this data come from?
The values come directly from Environment and Climate Change Canada – Water Survey of Canada, the official operator of this gauge, and are published under the Open Government Licence – Canada. We do not estimate or model live values.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment and Climate Change Canada – Water Survey of Canada
- Station code
eccc:03OA012(Agency page)- Coordinates
52.98772, -66.87703(WGS84)- Vertical datum
- station datum (assumed datum)
- Update interval
- every hour
- Licence
- Open Government Licence – Canada. Contains information licensed under the Open Government Licence – Canada
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 1.37 m | 2026-10-18 21:25 | Provisional |
| Flow | 0.59 m³/s | 2026-10-18 21:25 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment and Climate Change Canada – Water Survey of Canada: Luce Brook below Tinto Pond (eccc:03OA012). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/canada/newfoundland-and-labrador/luce-brook-below-tinto-pond
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer