Slave River at Fitzgerald water level
River gauge, Slave River, Alberta, Canada
Right now
Very high for mid-October
Water level
- Flow
- 4,020 m³/s
History
What this means
The gauge at Slave River at Fitzgerald shows 3.70 m, well above normal for mid-October.
That puts it 0.37 m above the median of 3.33 m for mid-October, based on 20 years of readings.
The water is rising: up 0.02 m over the past 24 hours. If the rise continues, low-lying paths and riverside parking can go under water. Over the past 30 days it has moved between 3.56 m and 3.88 m.
That stands out in fall, when many rivers are usually near their lowest.
Compared with 20 years of daily readings for this time of year. How to read levels
Key numbers
- Median for this date
- 3.33 m0.37 m above the median for this date
- Normal for this date
- 2.87 m – 3.63 m8 years in 10 fall in this range (20 years of records)
- Lowest and highest in 30 days
- 3.56 m – 3.88 m
- Lowest and highest in 12 months
- 3.57 m – 3.86 m
High water at Slave River at Fitzgerald
Official flood alerts and warnings come from the provincial river forecast centre. They cover areas, not single gauges, so a warning can be in force before this reading looks dramatic.
Keep children and dogs well back from the edge, and stay off flooded footpaths and towpaths.
Weather at the gauge
No rain in the last 3 days.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Tazin River near the MouthRiver gauge, Tazin River | 9.74 m | High | +0.04 m | 79 km |
Questions and answers
What is a normal level for the Slave River at Fitzgerald in mid-October?
The median for mid-October is 3.33 m. In 8 years out of 10 the reading falls between 2.87 m and 3.63 m, based on 20 years of records.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 3.70 m on the gauge does not mean the water is that deep.
What is the water level of Slave River at Fitzgerald today?
On Oct 17, 2026, 01:15 PM MDT, the water level was 3.70 m. Up 0.02 m over the last 24 hours.
Is Slave River at Fitzgerald rising or falling?
Up 0.02 m over the last 24 hours. Down 0.10 m over the last 7 days.
Is the level of Slave River at Fitzgerald normal?
Very high for mid-October. Compared with 20 years of daily readings for this time of year.
How often is this data updated?
Environment and Climate Change Canada – Water Survey of Canada publishes a new reading every hour. This page refreshes within minutes of each update.
Where does this data come from?
The values come directly from Environment and Climate Change Canada – Water Survey of Canada, the official operator of this gauge, and are published under the Open Government Licence – Canada. We do not estimate or model live values.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment and Climate Change Canada – Water Survey of Canada
- Station code
eccc:07NB001(Agency page)- Coordinates
59.86346, -111.59156(WGS84)- Vertical datum
- station datum (assumed datum)
- Update interval
- every hour
- Licence
- Open Government Licence – Canada. Contains information licensed under the Open Government Licence – Canada
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 3.70 m | 2026-10-17 19:15 | Provisional |
| Flow | 4,020 m³/s | 2026-10-17 19:15 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment and Climate Change Canada – Water Survey of Canada: Slave River at Fitzgerald (eccc:07NB001). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/canada/alberta/slave-river-at-fitzgerald
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer