Nivelmap
EN

Rawtenstall water level

River gauge, Limey Water, Lancashire, United Kingdom

Directions

Right now

Within the normal range

Water level

0.17m Down 0.04 m over the last 24 hours

0 1 Highest onrecord 1.62 m Lowest on record 0.00 m

History

History
0.180.20mOct 16Oct 16Oct 16Oct 17Oct 170.180.20mOct 16Oct 16Oct 17
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Rawtenstall reads 0.17 m, a normal level.

The usual range here runs from 0.04 m to 1.70 m.

The level is falling, down 0.04 m over the past 24 hours. Over the past 30 days it has moved between 0.17 m and 0.23 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.04 m – 1.70 m
Highest on record
1.62 mFebruary 9, 2020
Lowest on record
0.00 mJuly 27, 2006

On the river at Rawtenstall

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 3.4 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 10° 4° – Wind 16 km/h
18 Sun 11° 4° – Wind 16 km/h
19 Mon 13° 7° 3.0 mm, 61% Wind 28 km/h
20 Tue 10° 9° 2.1 mm, 47% Wind 18 km/h
21 Wed 10° 6° 2.1 mm, 82% Wind 23 km/h
22 Thu 11° 5° 4.5 mm, 57% Wind 17 km/h
23 Fri 9° 6° 40 mm, 92% Wind 32 km/h

Forecast: Open-Meteo

Sunrise 07:40 AM Sunset 06:10 PM Daylight 10 hr, 30 min First quarter 44%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Holt Mill BridgeRiver gauge, River Irwell 0.20 m Normal −0.03 m 2.3 km
Thornfield AvenueRiver gauge, Whitewell Brook 0.40 m Normal −0.03 m 2.6 km
Irwell ValeRiver gauge, River Irwell 0.35 m Normal −0.06 m 3.8 km
Little BridgeRiver gauge, Ogden Brook 0.05 m Low −0.03 m 3.8 km
StubbinsRiver gauge, River Irwell 0.16 m Normal −0.06 m 4.9 km
Throstle MillRiver gauge, River Irwell 0.49 m Normal −0.04 m 5.7 km
Ramsbottom WeirRiver gauge, River Irwell 0.37 m Normal −0.06 m 6.4 km
MilnshawRiver gauge, River Hyndburn 0.26 m Normal ±0 7.7 km

Questions and answers

What is the typical range for the Limey Water at Rawtenstall?

The Environment Agency gives a typical range of 0.04 m to 1.70 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.17 m on the gauge does not mean the water is that deep.

What is the water level of Rawtenstall today?

On 17 Oct 2026, 22:30 BST, the water level was 0.17 m. Down 0.04 m over the last 24 hours.

Is Rawtenstall rising or falling?

Down 0.04 m over the last 24 hours.

Is the level of Rawtenstall normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Rawtenstall?

The highest level on record is 1.62 m on February 9, 2020. The lowest is 0.00 m on July 27, 2006.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:690138 (Agency page)
Coordinates
53.70577, -2.28626 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.17 m 2026-10-17 21:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Rawtenstall (ea:690138). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/lancashire/rawtenstall

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.