Nivelmap
EN

Spixworth water level

River gauge, Spixworth Beck, Norfolk, United Kingdom

Directions

Right now

Below the normal range

Water level

0.09m Steady over the last 24 hours

0.0 0.5 1.0 Highest onrecord 1.17 m Lowest on record 0.05 m

History

History
0.090.090.09mOct 16Oct 16Oct 17Oct 18Oct 18Bottom of normal range0.090.090.09mOct 16Oct 17Oct 18Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

Low water at Spixworth: the gauge reads 0.09 m, below normal.

The usual range here runs from 0.09 m to 0.27 m.

The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.09 m – 0.27 m
Highest on record
1.17 mDecember 24, 2020
Lowest on record
0.05 mAugust 24, 2022

For anglers and canoeists

Low rivers are hard going for paddlers, with exposed gravel and weirs that are awkward to shoot. Salmon and sea trout usually wait for the next spate to run.

Many angling and canoe clubs check gauges like this one before heading out.

Weather at the gauge

Rain in the last 3 days: 7.3 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 14° 9° 4.5 mm, 100% Wind 25 km/h
19 Mon 15° 10° 2.6 mm, 100% Wind 15 km/h
20 Tue 14° 11° 4.6 mm, 64% Wind 21 km/h
21 Wed 14° 8° 14 mm, 64% Wind 30 km/h
22 Thu 10° 5° 0.8 mm, 35% Wind 25 km/h
23 Fri 14° 6° 15 mm, 73% Wind 33 km/h
24 Sat 12° 6° 1.8 mm, 43% Wind 30 km/h

Forecast: Open-Meteo

Sunrise 07:26 AM Sunset 05:55 PM Daylight 10 hr, 29 min First quarter 52%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Costessey MillRiver gauge, River Wensum 0.26 m Normal ±0 7.3 km
Hoveton BroadTidal gauge, River Bure 0.49 m Normal −0.04 m 7.7 km
ColneyRiver gauge, River Yare 0.15 m Low +0.01 m 10.0 km
Barton BroadTidal gauge, River Ant 0.48 m Normal −0.04 m 12 km
Ranworth BroadTidal gauge, River Bure 0.44 m Normal −0.04 m 12 km
BrundallTidal gauge, River Yare 0.56 m Normal −0.02 m 13 km
Wayford BridgeTidal gauge, River Ant 0.52 m Normal −0.04 m 14 km
IngworthRiver gauge, River Bure 0.18 m Very low −0.01 m 14 km

Questions and answers

What is the typical range for Spixworth Beck at Spixworth?

The Environment Agency gives a typical range of 0.09 m to 0.27 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.09 m on the gauge does not mean the water is that deep.

What is the water level of Spixworth today?

On 18 Oct 2026, 20:15 BST, the water level was 0.09 m. Steady over the last 24 hours.

Is Spixworth rising or falling?

Steady over the last 24 hours.

Is the level of Spixworth normal?

Below the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Spixworth?

The highest level on record is 1.17 m on December 24, 2020. The lowest is 0.05 m on August 24, 2022.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E21865 (Agency page)
Coordinates
52.69943, 1.31287 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.09 m 2026-10-18 19:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Spixworth (ea:E21865). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/norfolk/spixworth

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.