Brushford water level
River gauge, River Barle, Somerset, United Kingdom
Right now
Within the normal range
Water level
History
What this means
The gauge at Brushford reads 0.40 m, a normal level.
The usual range here runs from 0.18 m to 1.50 m.
The level is falling, down 0.02 m over the past 24 hours. Over the past 30 days it has moved between 0.40 m and 0.44 m.
Autumn rain usually starts to lift rivers again after the summer low.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- 0.18 m – 1.50 m
- Highest on record
- 3.05 mDecember 22, 2012
- Lowest on record
- 0.06 mSeptember 7, 2002
On the river at Brushford
A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.
Flood warnings for the area come from the Environment Agency.
About the River Barle
The River Barle runs from the Chains on northern Exmoor, in Somerset, England to join the River Exe at Exebridge, Devon. The river and the Barle Valley are both designated as biological Sites of Special Scientific Interest.
Text and image from Wikipedia and Wikimedia Commons, licensed under CC BY-SA.
Weather at the gauge
Rain in the last 3 days: 1.9 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Other gauges on the River Barle
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| SimonsbathRiver gauge, River Barle | 0.25 m | Normal | −0.02 m | 20 km |
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| PixtonRiver gauge, River Exe | 0.09 m | Very low | −0.02 m | 0.8 km |
| ExebridgeRiver gauge, River Exe | 0.20 m | Normal | −0.01 m | 1.2 km |
| Dulverton Town MarshRiver gauge, Marsh Water | 0.43 m | Lowest on record | −0.01 m | 2.5 km |
| Bampton BridgeRiver gauge, River Batherm | 0.07 m | Normal | −0.01 m | 4.9 km |
| Wimbleball FootbridgeRiver gauge, River Haddeo | 0.22 m | High | −0.02 m | 5.1 km |
| WimbleballRiver gauge, River Haddeo | 0.22 m | High | −0.01 m | 5.1 km |
| UptonRiver gauge, River Haddeo | 0.06 m | Very low | ±0 | 6.8 km |
| Upton TributaryRiver gauge, River Haddeo | 0.04 m | Very low | ±0 | 6.9 km |
Questions and answers
What is the typical range for the River Barle at Brushford?
The Environment Agency gives a typical range of 0.18 m to 1.50 m for this gauge.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 0.40 m on the gauge does not mean the water is that deep.
What is the water level of Brushford today?
On 18 Oct 2026, 01:30 BST, the water level was 0.40 m. Down 0.02 m over the last 24 hours.
Is Brushford rising or falling?
Down 0.02 m over the last 24 hours.
Is the level of Brushford normal?
Within the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Brushford?
The highest level on record is 3.05 m on December 22, 2012. The lowest is 0.06 m on September 7, 2002.
How often is this data updated?
The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment Agency
- Station code
ea:45121(Agency page)- Coordinates
51.02186, -3.53136(WGS84)- Vertical datum
- station datum
- Update interval
- every 15 minutes
- Licence
- Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 0.40 m | 2026-10-18 00:30 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment Agency: Brushford (ea:45121). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/somerset/brushford
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer