Nivelmap
EN

Kenilworth Whateleys Drive water level

River gauge, Warwickshire, United Kingdom

Directions

Right now

Latest reading

Water level

0.18m Up 0.05 m over the last 24 hours

0.0 0.5

History

History
0.10.20.3mOct 12Oct 14Oct 16Oct 17Oct 190.10.20.3mOct 12Oct 16Oct 19
0.10.20.3mSep 19Sep 27Oct 4Oct 12Oct 190.10.20.3mSep 19Oct 4Oct 19
Water level

What this means

The latest river level reported for Kenilworth Whateleys Drive is 0.18 m. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

The water is rising: up 0.05 m over the past 24 hours. Over the past 30 days it has moved between 0.10 m and 0.34 m.

Over the past seven days the change adds up to +0.03 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
0.10 m – 0.34 m
Lowest and highest in 12 months
0.10 m – 0.21 m

On the river at Kenilworth Whateleys Drive

There is no published typical range for this gauge yet, so anglers and canoeists are best guided by the trend.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 2.5 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

19 Mon 13° 9° 7.5 mm, 100% Wind 18 km/h
20 Tue 11° 10° 19 mm, 100% Wind 17 km/h
21 Wed 11° 7° 5.4 mm, 63% Wind 32 km/h
22 Thu 11° 3° 2.4 mm, 65% Wind 22 km/h
23 Fri 11° 7° 13 mm, 91% Wind 40 km/h
24 Sat 11° 5° 11 mm, 61% Wind 26 km/h
25 Sun 16° 10° 4.4 mm, 41% Wind 35 km/h

Forecast: Open-Meteo

Sunrise 07:39 AM Sunset 06:05 PM Daylight 10 hr, 27 min First quarter 61%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
KenilworthRiver gauge, Finham Brook 0.69 m Low +0.01 m 0.9 km
StaretonRiver gauge, River Avon 0.17 m Normal +0.01 m 4.1 km
Sir Henry Parkes RoadRiver gauge, Canley Brook 0.25 m Normal +0.03 m 5.5 km
Torrington AvenueRiver gauge, Canley Brook 0.00 m Lowest on record +0.01 m 5.8 km
WarwickRiver gauge, River Avon 1.17 m Normal +0.07 m 6.8 km
Hope Street, CoventryRiver gauge, River Sherbourne 0.45 m Normal +0.10 m 7.6 km
Charterhouse BridgeRiver gauge, River Sherbourne 0.17 m Normal +0.02 m 8.1 km
Holyhead RoadRiver gauge, River Sherbourne 0.09 m Normal +0.01 m 8.2 km

Questions and answers

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.18 m on the gauge does not mean the water is that deep.

What is the water level of Kenilworth Whateleys Drive today?

On 19 Oct 2026, 17:45 BST, the water level was 0.18 m. Up 0.05 m over the last 24 hours.

Is Kenilworth Whateleys Drive rising or falling?

Up 0.05 m over the last 24 hours. Up 0.03 m over the last 7 days.

Is the level of Kenilworth Whateleys Drive normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:2540
Coordinates
52.34595, -1.57318 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.18 m 2026-10-19 16:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Kenilworth Whateleys Drive (ea:2540). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/warwickshire/kenilworth-whateleys-drive

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.