Nivelmap
EN

Hubbard Creek at Highway 133 at Mouth near Bowie water level

River gauge, Hubbard Creek, Colorado, United States

Directions

Right now

High for mid-October

Water level

0.56ft Up 0.13 ft over the last 24 hours

Flow
8.3 cfs
-1 0 1 3

History

History
0.50.6ftOct 16Oct 17Oct 18Oct 19Oct 210.50.6ftOct 16Oct 18Oct 21
Water level

What this means

Hubbard Creek at Highway 133 at Mouth near Bowie is above normal at 0.56 ft.

It has risen 0.13 ft over the past 24 hours. If the rise continues, low-lying paths and riverside parking can go under water. In the last month it has stayed between 0.42 ft and 0.63 ft.

That stands out in fall, when many rivers are usually near their lowest.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Hubbard Creek at Highway 133 at Mouth near Bowie

Experienced paddlers may enjoy higher water, but many outfitters stop rentals once a river runs this high.

Weather at the gauge

No rain in the last 3 days.

20 Tue 65° 43° – Wind 10 mph
21 Wed 66° 49° 0.26 in, 48% Wind 13 mph
22 Thu 58° 51° 0.90 in, 90% Wind 10 mph
23 Fri 59° 45° 0.48 in, 90% Wind 11 mph
24 Sat 65° 44° 0.26 in, 44% Wind 12 mph
25 Sun 58° 42° 0.07 in, 44% Wind 6 mph
26 Mon 56° 40° – Wind 7 mph

Forecast: Open-Meteo

Sunrise 07:26 AM Sunset 06:24 PM Daylight 10 hr, 58 min Waxing gibbous 74%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
North Fork Gunnison River near SomersetRiver gauge, North Fork Gunnison River 1.41 ft Below flood stage +0.03 ft 4.5 mi
North Fork Gunnison River below PaoniaRiver gauge, North Fork Gunnison River 128 cfs Normal +24.0 cfs 7 mi
Anthracite Creek above Mouth near SomersetRiver gauge, Anthracite Creek 96.5 cfs Very high +7.1 cfs 9 mi
Paonia Reservoir near BardineReservoir, Paonia Reservoir 6,386.74 ft Very high 9 mi
Leroux Creek above Mouth near HotchkissRiver gauge, Leroux Creek 6.3 cfs Very low −0.3 cfs 15 mi
Crawford Reservoir near CrawfordReservoir, Crawford Reservoir 1,180 acre‑ft Normal +20 acre‑ft 17 mi
Crawford Dam and ReservoirReservoir 6,490.56 ft Low 17 mi
Surface Creek near CedaredgeRiver gauge, Surface Creek 2.53 ft Below flood stage −0.04 ft 18 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Hubbard Creek at Highway 133 at Mouth near Bowie today?

On Oct 20, 2026, 09:45 PM MDT, the water level was 0.56 ft. Up 0.13 ft over the last 24 hours.

Is Hubbard Creek at Highway 133 at Mouth near Bowie rising or falling?

Up 0.13 ft over the last 24 hours.

Is the level of Hubbard Creek at Highway 133 at Mouth near Bowie normal?

High for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:09132960 (Agency page)
Coordinates
38.92554, -107.51839 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.56 ft 2026-10-21 03:45 Provisional
Flow 8.3 cfs 2026-10-21 03:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Hubbard Creek at Highway 133 at Mouth near Bowie (usgs:09132960). Accessed October 21, 2026 via Nivelmap, https://nivelmap.com/en/united-states/colorado/hubbard-creek-at-highway-133-at-mouth-near-bowie

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.