Nivelmap
EN

Huntsmoor Weir water level

River gauge, Buckinghamshire, United Kingdom

Directions

Right now

Latest reading

Surface elevation

27.37m Up 0.01 m over the last 24 hours

25 30

History

History
27.3627.38mOct 12Oct 14Oct 16Oct 17Oct 1927.3627.38mOct 12Oct 16Oct 19
26.026.527.027.5mSep 19Sep 27Oct 4Oct 12Oct 1926.026.527.027.5mSep 19Oct 4Oct 19
Surface elevation

What this means

The Environment Agency has Huntsmoor Weir at 27.37 m. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It is on the way up, by 0.01 m over the past 24 hours. The 30-day range is 25.87 m – 27.39 m.

Over the past seven days the change adds up to 0.00 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
25.87 m – 27.39 m
Lowest and highest in 12 months
27.13 m – 27.39 m

For anglers and canoeists

Without a reference range, compare today with the chart: a sharp rise usually means coloured water.

Many angling and canoe clubs check gauges like this one before heading out.

Weather at the gauge

Rain in the last 3 days: 3.7 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

19 Mon 14° 9° 0.6 mm, 89% Wind 12 km/h
20 Tue 13° 10° 9.1 mm, 97% Wind 19 km/h
21 Wed 12° 8° 5.4 mm, 53% Wind 34 km/h
22 Thu 12° 6° 4.7 mm, 79% Wind 19 km/h
23 Fri 13° 8° 17 mm, 92% Wind 39 km/h
24 Sat 12° 6° 10 mm, 61% Wind 27 km/h
25 Sun 18° 11° 6.4 mm, 51% Wind 32 km/h

Forecast: Open-Meteo

Sunrise 07:33 AM Sunset 06:02 PM Daylight 10 hr, 29 min First quarter 60%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Iver, Clisbys BridgeRiver gauge, River Colne 0.32 m Normal +0.02 m 0.7 km
Farlows BridgeRiver gauge, River Colne 0.35 m Low +0.01 m 0.8 km
Uxbridge, Philpots BridgeRiver gauge, River Pinn 0.86 m Normal +0.10 m 1.1 km
UxbridgeRiver gauge, River Pinn 0.09 m Normal +0.06 m 1.7 km
YiewsleyRiver gauge, Frays River 0.75 m Very low +0.02 m 1.8 km
Thorney Mill Road, West Drayton (Temporary)River gauge, River Colne 0.04 m Very low +0.04 m 2.5 km
West DraytonRiver gauge, River Colne 0.42 m Low +0.02 m 2.5 km
Uxbridge, Fountains MillRiver gauge, Frays River 0.61 m Very low ±0 2.9 km

Questions and answers

Is Huntsmoor Weir really 27.37 m deep?

No. 27.37 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Huntsmoor Weir today?

On 19 Oct 2026, 16:45 BST, the surface elevation was 27.37 m. Up 0.01 m over the last 24 hours.

Is Huntsmoor Weir rising or falling?

Up 0.01 m over the last 24 hours. Steady over the last 7 days.

Is the level of Huntsmoor Weir normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:0321TH
Coordinates
51.52338, -0.48991 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 27.37 m 2026-10-19 15:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Huntsmoor Weir (ea:0321TH). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/buckinghamshire/huntsmoor-weir-0321th

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.