Dexter Dam Tailwater at Dexter water level
River gauge, Dexter Dam Tailwater, Oregon, United States
Right now
Very low for mid-October
Water level
History
Not enough readings for a chart yet. History builds up with every update.
What this means
At 637.19 ft, the Dexter Dam Tailwater at Dexter is far below normal for mid-October.
That puts it 0.20 ft below the median of 637.39 ft for mid-October, based on 13 years of readings.
The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly.
Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.
Compared with 13 years of daily readings for this time of year. How to read levels
Key numbers
- Median for this date
- 637.39 ft0.20 ft below the median for this date
- Normal for this date
- 637.20 ft – 637.69 ft8 years in 10 fall in this range (13 years of records)
What the stage means on the water
Low water means more dragging on shallow riffles and slower floats. Fish crowd into the deeper runs, and warm, low water stresses them, so play and release them quickly.
Weather at the gauge
No rain in the last 3 days.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Fall Creek below Winberry Creek, near Fall CreekRiver gauge, Fall Creek | 200 cfs | Normal | ±0 | 2.1 mi |
| Middle Fork Willamette River near DexterRiver gauge, Middle Fork Willamette River | 1,240 cfs | Low | −10.0 cfs | 2.2 mi |
| Lookout Point Dam Tailwater near LowellRiver gauge, Lookout Point Dam Tailwater | 692.59 ft | Normal | ±0 | 2.7 mi |
| Winberry Creek near LowellRiver gauge, Winberry Creek | 3.2 cfs | Very low | −0.2 cfs | 5.9 mi |
| Middle Fork Willamette River at JasperRiver gauge, Middle Fork Willamette River | 2.55 ft | Below flood stage | −0.01 ft | 7 mi |
| Coast Fork Willamette River near GoshenRiver gauge, Coast Fork Willamette River | 2.19 ft | Below flood stage | −0.01 ft | 9 mi |
| Fall Creek above North Fork, near LowellRiver gauge, Fall Creek | 2.52 ft | Very low | ±0 | 9 mi |
| McKenzie River near WaltervilleRiver gauge, McKenzie River | 1.77 ft | Below flood stage | −0.01 ft | 10 mi |
Questions and answers
What is a normal level for the Dexter Dam Tailwater at Dexter in mid-October?
The median for mid-October is 637.39 ft. In 8 years out of 10 the reading falls between 637.20 ft and 637.69 ft, based on 13 years of records.
Is gage height the same as water depth?
No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.
What is the water level of Dexter Dam Tailwater at Dexter today?
On Oct 16, 2026, 08:25 AM PDT, the water level was 637.19 ft. Steady over the last 24 hours.
Is Dexter Dam Tailwater at Dexter rising or falling?
Steady over the last 24 hours.
Is the level of Dexter Dam Tailwater at Dexter normal?
Very low for mid-October. Compared with 13 years of daily readings for this time of year.
How often is this data updated?
The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
Where does this data come from?
The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- U.S. Geological Survey
- Station code
usgs:14149510(Agency page)- Coordinates
43.92434, -122.80561(WGS84)- Vertical datum
- NGVD29
- Update interval
- every 15 minutes
- Licence
- Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 637.19 ft | 2026-10-16 15:25 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
U.S. Geological Survey: Dexter Dam Tailwater at Dexter (usgs:14149510). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-states/oregon/dexter-dam-tailwater-at-dexter
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer