Nivelmap
EN

South Umpqua River at Melrose water level

River gauge, South Umpqua River, Oregon, United States

Directions

Right now

Latest reading

Water level

0.84ft Steady over the last 24 hours

Flow
117 cfs
Water temperature
58 °F
-1 0 1 3

History

History
0.830.850.88ftOct 16Oct 16Oct 17Oct 18Oct 190.830.850.88ftOct 16Oct 17Oct 19
Water level

What this means

The South Umpqua River at Melrose reads 0.84 ft as of Oct 19, 2026, 07:45 AM PDT. The agency publishes no normal range or warning level for this river yet, so there is nothing to judge the number against.

The level has held steady over the past 24 hours. In the last month it has stayed between 0.81 ft and 0.96 ft.

The sensor also reports a water temperature of 58 °F.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Floating and fishing near South Umpqua River at Melrose

Use the recent trend as your guide, and ask locally which gage height makes for a good float.

Weather at the gauge

The forecast is not available right now.

Sunrise 07:33 AM Sunset 06:26 PM Daylight 10 hr, 53 min First quarter 60%

Map

Other gauges on the South Umpqua River

Gauge Level Compared with normal 24 hours Distance
South Umpqua River at TillerRiver gauge, South Umpqua River 0.56 ft Below flood stage ±0 34 mi
South Umpqua River at CanyonvilleRiver gauge, South Umpqua River 3.89 ft No reference yet ±0 23 mi
South Umpqua River near BrockwayRiver gauge, South Umpqua River 2.99 ft Below flood stage −0.01 ft 9 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
North Umpqua River at WinchesterRiver gauge, North Umpqua River 1.78 ft Below flood stage +0.02 ft 2.3 mi
Little Wolf Creek near TyeeRiver gauge, Little Wolf Creek 0.4 cfs Normal ±0 14 mi
Cow Creek near RiddleRiver gauge, Cow Creek 1.12 ft Below flood stage −0.01 ft 23 mi
Umpqua River near ElktonRiver gauge, Umpqua River 2.89 ft Below flood stage ±0 24 mi
Rock Creek near GlideRiver gauge, Rock Creek 14.7 cfs Very low +0.7 cfs 24 mi
West Fork Cow Creek near GlendaleRiver gauge, West Fork Cow Creek 4.7 cfs Very low ±0 32 mi
Cow Creek near AzaleaRiver gauge, Cow Creek 43.8 cfs Normal −1.0 cfs 32 mi
Coast Fork Willamette at LondonRiver gauge, Coast Fork Willamette 8.6 cfs Very low +0.8 cfs 32 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of South Umpqua River at Melrose today?

On Oct 19, 2026, 07:45 AM PDT, the water level was 0.84 ft. Steady over the last 24 hours.

Is South Umpqua River at Melrose rising or falling?

Steady over the last 24 hours.

Is the level of South Umpqua River at Melrose normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:14312330 (Agency page)
Coordinates
43.25176, -123.44770 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.84 ft 2026-10-19 14:45 Provisional
Flow 117 cfs 2026-10-19 14:45 Provisional
Water temperature 58 °F 2026-10-19 14:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: South Umpqua River at Melrose (usgs:14312330). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/united-states/oregon/south-umpqua-river-at-melrose

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.