Nivelmap
EN

Walnut Creek Upstream Pool, near Erie water level

River gauge, Walnut Creek Upstream Pool, Pennsylvania, United States

Directions

Right now

Very low for mid-October

Water level

3.22ft Steady over the last 24 hours

Flow
9.5 cfs
Water temperature
53 °F
1 3 4 5

History

History
3.23.43.6ftOct 16Oct 17Oct 18Oct 19Oct 203.23.43.6ftOct 16Oct 18Oct 20
Water level

What this means

Walnut Creek Upstream Pool, near Erie is running far below normal at 3.22 ft.

The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. In the last month it has stayed between 3.18 ft and 3.64 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that. The sensor also reports a water temperature of 53 °F.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Walnut Creek Upstream Pool, near Erie

Low water exposes gravel bars that make good wading access, but some boat ramps may be left high and dry.

Weather at the gauge

No rain in the last 3 days.

20 Tue 61° 42° – Wind 11 mph
21 Wed 58° 40° – Wind 6 mph
22 Thu 59° 45° – Wind 7 mph
23 Fri 62° 46° – Wind 11 mph
24 Sat 64° 44° – Wind 11 mph
25 Sun 67° 47° – Wind 14 mph
26 Mon 68° 52° – Wind 16 mph

Forecast: Open-Meteo

Sunrise 07:40 AM Sunset 06:33 PM Daylight 10 hr, 53 min Waxing gibbous 72%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Brandy Run near GirardRiver gauge, Brandy Run 1.4 cfs Low ±0 6 mi
West Branch French Creek near LowvilleRiver gauge, West Branch French Creek 4.07 ft Below flood stage −0.09 ft 20 mi
Union City Reservoir on French Creek near Union CityReservoir, Union City Reservoir on French Creek 1,223.29 ft Normal −0.85 ft 20 mi
French Creek at Cambridge SpringsRiver gauge, French Creek 1.88 ft Normal −0.07 ft 20 mi
French Creek near Union CityRiver gauge, French Creek 2.81 ft Below flood stage −0.07 ft 21 mi
Conneaut Creek at Conneaut OHRiver gauge, Conneaut Creek 26.0 cfs Normal ±0 22 mi
French Creek near WattsburgRiver gauge, French Creek 29.5 cfs Low −5.7 cfs 24 mi
Woodcock Creek Lake near SaegertownLake, Woodcock Creek Lake 1,164.88 ft Below flood stage −0.05 ft 27 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Walnut Creek Upstream Pool, near Erie today?

On Oct 20, 2026, 05:30 PM EDT, the water level was 3.22 ft. Steady over the last 24 hours.

Is Walnut Creek Upstream Pool, near Erie rising or falling?

Steady over the last 24 hours.

Is the level of Walnut Creek Upstream Pool, near Erie normal?

Very low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:04213152 (Agency page)
Coordinates
42.07389, -80.23472 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 3.22 ft 2026-10-20 21:30 Provisional
Flow 9.5 cfs 2026-10-20 21:30 Provisional
Water temperature 53 °F 2026-10-20 21:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Walnut Creek Upstream Pool, near Erie (usgs:04213152). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/pennsylvania/walnut-creek-upstream-pool-near-erie

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.