Gsl Breach at Lakeside water level
Lake, Gsl Breach, Utah, United States
Right now
Normal for mid-October
Water level
- Flow
- 0.0 cfs
History
What this means
The lake level at Gsl Breach at Lakeside reads 6.40 ft, about where it usually sits at this time of year.
It has barely moved over the past 24 hours. The 30-day range is 6.36 ft – 6.43 ft.
Lakes and reservoirs often sit lower in fall after a summer of evaporation and use, and recover with winter rain and spring snowmelt.
Compared with 5 years of daily readings for this time of year. How to read levels
Boating and fishing at Gsl Breach at Lakeside
A lake in its usual range is what most ramps, docks and swimming areas are built for.
Conditions at the shore change with the level, so check with the agency that runs the lake before a trip.
Weather at the gauge
The forecast is not available right now.
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Gsl S. Side of Causeway, 6 Miles E of LakesideLake | 4,189.80 ft | Low | −0.10 ft | 4.8 mi |
| Great Salt Lake near SalineLake, Great Salt Lake | 4,189.60 ft | Normal | ±0 | 18 mi |
| Gsl Farmington Bay Outflow at Causeway BridgeLake, Gsl Farmington Bay Outflow | 486 cfs | Normal | −76.0 cfs | 34 mi |
| Weber River near Plain CityRiver gauge, Weber River | 11.43 ft | Normal | −0.14 ft | 40 mi |
| Willard Bay Reservoir and Arthur V WatkinsReservoir | 4,216.11 ft | Normal | 41 mi | |
| Bear River near CorinneRiver gauge, Bear River | 3.79 ft | Below flood stage | −0.26 ft | 46 mi |
| Great Salt Lake at Saltair Boat HarborLake, Great Salt Lake | 4,189.80 ft | Low | +0.10 ft | 47 mi |
| Lee Creek near MagnaRiver gauge, Lee Creek | 67.7 cfs | High | −0.4 cfs | 48 mi |
Questions and answers
What is the water level of Gsl Breach at Lakeside today?
On Oct 17, 2026, 11:15 PM MDT, the water level was 6.40 ft. Steady over the last 24 hours.
Is Gsl Breach at Lakeside rising or falling?
Steady over the last 24 hours.
Is the level of Gsl Breach at Lakeside normal?
Normal for mid-October. Compared with 5 years of daily readings for this time of year.
How often is this data updated?
The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
Where does this data come from?
The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- U.S. Geological Survey
- Station code
usgs:10010020(Agency page)- Coordinates
41.22241, -112.84999(WGS84)- Vertical datum
- NAVD88
- Update interval
- every 15 minutes
- Licence
- Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 6.40 ft | 2026-10-18 05:15 | Provisional |
| Flow | 0.0 cfs | 2026-10-12 17:00 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
U.S. Geological Survey: Gsl Breach at Lakeside (usgs:10010020). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-states/utah/gsl-breach-at-lakeside
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer