Nivelmap
EN

Richland Creek near Witts Spring water level

River gauge, Richland Creek, Arkansas, United States

Directions

Right now

Low for mid-October

Water level

0.20ft Down 0.05 ft over the last 24 hours

Flow
0.2 cfs
-1 0 1 3

History

History
0.20.30.4ftOct 16Oct 17Oct 18Oct 19Oct 200.20.30.4ftOct 16Oct 18Oct 20
Water level

What this means

Low water at Richland Creek near Witts Spring: the gauge reads 0.20 ft, below normal for mid-October.

It is still going down, by 0.05 ft over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. The 30-day range is 0.19 ft – 0.46 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.

Compared with 5 years of daily readings for this time of year. How to read levels

Paddling and fishing conditions

At low levels, plan for shorter paddling trips and expect to walk your boat through a few shoals.

Weather at the gauge

Rain in the last 3 days: 0.73 in. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 61° 42° – Wind 12 mph
18 Sun 66° 42° – Wind 5 mph
19 Mon 69° 47° – Wind 6 mph
20 Tue 72° 51° – Wind 5 mph
21 Wed 76° 52° – Wind 4 mph
22 Thu 79° 56° – Wind 3 mph
23 Fri 78° 57° – Wind 6 mph

Forecast: Open-Meteo

Sunrise 07:23 AM Sunset 06:31 PM Daylight 11 hr, 8 min First quarter 69%

Map

Other gauges on Richland Creek

Gauge Level Compared with normal 24 hours Distance
Richland Creek near GoshenRiver gauge, Richland Creek 0.2 cfs Normal −0.1 cfs 61 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Bear Creek near Silver HillRiver gauge, Bear Creek 3.2 cfs Very low −0.3 cfs 16 mi
Buffalo River near St. JoeRiver gauge, Buffalo River 3.03 ft Below flood stage −0.08 ft 16 mi
Buffalo River at PruittRiver gauge, Buffalo River 17.0 cfs Normal −4.0 cfs 22 mi
South Fork of Little Red River near ScotlandRiver gauge, South Fork of Little Red River 0.0 cfs Low ±0 23 mi
Illinois Bayou near ScottsvilleRiver gauge, Illinois Bayou 4.1 cfs Normal −0.1 cfs 24 mi
Big Piney Creek at Highway 164 near DoverRiver gauge, Big Piney Creek 0.13 ft Low −0.05 ft 25 mi
Buffalo River near HarrietRiver gauge, Buffalo River 123 cfs Normal −18.0 cfs 27 mi
Buffalo River near BoxleyRiver gauge, Buffalo River 1.5 cfs Low −0.3 cfs 28 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Richland Creek near Witts Spring today?

On Oct 20, 2026, 09:00 AM CDT, the water level was 0.20 ft. Down 0.05 ft over the last 24 hours.

Is Richland Creek near Witts Spring rising or falling?

Down 0.05 ft over the last 24 hours.

Is the level of Richland Creek near Witts Spring normal?

Low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:07055875 (Agency page)
Coordinates
35.79722, -92.92889 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.20 ft 2026-10-20 14:00 Provisional
Flow 0.2 cfs 2026-10-20 14:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Richland Creek near Witts Spring (usgs:07055875). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/arkansas/richland-creek-near-witts-spring

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.