Nivelmap
EN

Beaverdam Branch at Houston water level

River gauge, Beaverdam Branch, Delaware, United States

Directions

Right now

Normal for mid-October

Water level

2.58ft Down 0.06 ft over the last 24 hours

Flow
1.5 cfs
Water temperature
56 °F
1 3 4 5

History

History
2.582.602.63ftOct 16Oct 16Oct 17Oct 18Oct 182.582.602.63ftOct 16Oct 17Oct 18
Water level

What this means

Beaverdam Branch at Houston is at 2.58 ft, in the normal range for mid-October.

It has dropped 0.06 ft over the past 24 hours. In the last month it has stayed between 2.56 ft and 2.67 ft.

Fall is often low-water season on rivers, until steadier rain returns. The sensor also reports a water temperature of 56 °F.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Beaverdam Branch at Houston

Normal flows mean predictable rapids and good access at most put-ins.

Weather at the gauge

Rain in the last 3 days: 0.91 in. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 55° 40° – Wind 12 mph
19 Mon 59° 44° – Wind 16 mph
20 Tue 66° 48° – Wind 16 mph
21 Wed 62° 50° – Wind 14 mph
22 Thu 65° 45° – Wind 11 mph
23 Fri 59° 49° – Wind 14 mph
24 Sat 59° 47° – Wind 12 mph

Forecast: Open-Meteo

Sunrise 07:15 AM Sunset 06:21 PM Daylight 11 hr, 6 min First quarter 53%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Marshyhope Creek near AdamsvilleRiver gauge, Marshyhope Creek 12.5 cfs Normal +0.6 cfs 9 mi
Nanticoke River near BridgevilleRiver gauge, Nanticoke River 4.41 ft Below flood stage −0.10 ft 13 mi
Choptank River near GreensboroRiver gauge, Choptank River 35.5 cfs Normal +2.4 cfs 16 mi
St Jones River at DoverRiver gauge, St Jones River 2.85 ft Below flood stage −0.01 ft 18 mi
Tuckahoe Creek near RuthsburgRiver gauge, Tuckahoe Creek 44.7 cfs Normal +1.5 cfs 24 mi
Millsboro Pond Outlet at MillsboroRiver gauge, Millsboro Pond Outlet 36.2 cfs Normal −6.0 cfs 25 mi
Unicorn Branch near MillingtonRiver gauge, Unicorn Branch 8.7 cfs Normal −1.4 cfs 30 mi
Sallie Harris Creek near CarmichaelRiver gauge, Sallie Harris Creek 4.0 cfs Normal −3.0 cfs 32 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Beaverdam Branch at Houston today?

On Oct 18, 2026, 06:00 PM EDT, the water level was 2.58 ft. Down 0.06 ft over the last 24 hours.

Is Beaverdam Branch at Houston rising or falling?

Down 0.06 ft over the last 24 hours.

Is the level of Beaverdam Branch at Houston normal?

Normal for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:01484100 (Agency page)
Coordinates
38.90578, -75.51275 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 2.58 ft 2026-10-18 22:00 Provisional
Flow 1.5 cfs 2026-10-18 22:00 Provisional
Water temperature 56 °F 2026-10-18 22:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Beaverdam Branch at Houston (usgs:01484100). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-states/delaware/beaverdam-branch-at-houston

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.