Nivelmap
EN

Cedar Creek at Highway 1442 near Shepherdsville water level

River gauge, Cedar Creek, Kentucky, United States

Directions

Right now

Low for mid-October

Water level

1.70ft Steady over the last 24 hours

Flow
0.6 cfs
Water temperature
53 °F
0 1 3 4

History

History
1.701.751.801.85ftOct 16Oct 17Oct 18Oct 19Oct 201.701.751.801.85ftOct 16Oct 18Oct 20
Water level

What this means

At 1.70 ft, Cedar Creek at Highway 1442 near Shepherdsville is below normal for mid-October.

The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. Over the past 30 days it has moved between 1.70 ft and 1.85 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that. The sensor also reports a water temperature of 53 °F.

Compared with 5 years of daily readings for this time of year. How to read levels

What the stage means on the water

Low water means more dragging on shallow riffles and slower floats. Fish crowd into the deeper runs, and warm, low water stresses them, so play and release them quickly.

Weather at the gauge

The forecast is not available right now.

Sunrise 07:57 AM Sunset 06:59 PM Daylight 11 hr, 3 min Waxing gibbous 71%

Map

Other gauges on Cedar Creek

Gauge Level Compared with normal 24 hours Distance
Cedar Creek at Thixton Road near LouisvilleRiver gauge, Cedar Creek 13.4 cfs Normal −1.2 cfs 6 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Floyds Fork near ShepherdsvilleRiver gauge, Floyds Fork 2.56 ft Low −0.07 ft 2.4 mi
Salt River at ShepherdsvilleRiver gauge, Salt River 1.27 ft Below flood stage −0.07 ft 4.2 mi
Long Lick at ClermontRiver gauge, Long Lick 3.6 cfs Very high −0.6 cfs 4.4 mi
Penn Run at Mount Washington Road near LouisvilleRiver gauge, Penn Run 2.9 cfs Normal −0.3 cfs 7 mi
Floyds Fork near Mount WashingtonRiver gauge, Floyds Fork 43.4 cfs Normal −10.0 cfs 8 mi
Northern Ditch at OkolonaRiver gauge, Northern Ditch 3.0 cfs Normal −0.4 cfs 11 mi
Pond Creek near LouisvilleRiver gauge, Pond Creek 10.8 cfs Normal −2.3 cfs 12 mi
Fern Creek at Old Bardstown Road at LouisvilleRiver gauge, Fern Creek 0.3 cfs Very low ±0 13 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Cedar Creek at Highway 1442 near Shepherdsville today?

On Oct 20, 2026, 04:15 PM EDT, the water level was 1.70 ft. Steady over the last 24 hours.

Is Cedar Creek at Highway 1442 near Shepherdsville rising or falling?

Steady over the last 24 hours.

Is the level of Cedar Creek at Highway 1442 near Shepherdsville normal?

Low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:03297800 (Agency page)
Coordinates
37.99111, -85.64111 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 1.70 ft 2026-10-20 20:15 Provisional
Flow 0.6 cfs 2026-10-20 20:15 Provisional
Water temperature 53 °F 2026-10-20 20:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Cedar Creek at Highway 1442 near Shepherdsville (usgs:03297800). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/kentucky/cedar-creek-at-highway-1442-near-shepherdsville

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.