Nivelmap
EN

Conewago Creek near Falmouth water level

River gauge, Conewago Creek, Pennsylvania, United States

Directions

Right now

Normal for mid-October

Water level

3.78ft Steady over the last 24 hours

Flow
17.8 cfs
Water temperature
51 °F
3 4 5 6

History

History
3.84.04.2ftOct 16Oct 17Oct 18Oct 19Oct 203.84.04.2ftOct 16Oct 18Oct 20
Water level

What this means

Conewago Creek near Falmouth is at 3.78 ft, in the normal range for mid-October.

The level has held steady over the past 24 hours. In the last month it has stayed between 3.77 ft and 4.21 ft.

Fall is often low-water season on rivers, until steadier rain returns. The sensor also reports a water temperature of 51 °F.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Conewago Creek near Falmouth

Normal flows mean predictable rapids and good access at most put-ins.

Weather at the gauge

Rain in the last 3 days: 0.06 in. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 60° 42° – Wind 19 mph
18 Sun 58° 37° – Wind 6 mph
19 Mon 64° 39° – Wind 8 mph
20 Tue 67° 44° – Wind 15 mph
21 Wed 63° 40° – Wind 8 mph
22 Thu 63° 39° – Wind 13 mph
23 Fri 64° 42° – Wind 9 mph

Forecast: Open-Meteo

Sunrise 07:23 AM Sunset 06:21 PM Daylight 10 hr, 58 min Waxing gibbous 69%

Map

Other gauges on Conewago Creek

Gauge Level Compared with normal 24 hours Distance
Conewago Creek near BellaireRiver gauge, Conewago Creek 7.9 cfs Normal −0.6 cfs 7 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Fishing Creek at GoldsboroRiver gauge, Fishing Creek 11.7 cfs High −0.7 cfs 3.6 mi
Swatara Creek at MiddletownRiver gauge, Swatara Creek 2.55 ft Below flood stage −0.15 ft 3.7 mi
West Conewago Creek near ManchesterRiver gauge, West Conewago Creek 173 cfs Normal −34.0 cfs 5.0 mi
Codorus Creek near SaginawRiver gauge, Codorus Creek 144 cfs Normal ±0 7 mi
Swatara Creek near HersheyRiver gauge, Swatara Creek 1.99 ft Below flood stage −0.06 ft 10 mi
Susquehanna River at MariettaRiver gauge, Susquehanna River 34.65 ft Below flood stage −0.45 ft 11 mi
Chiques Creek near MariettaRiver gauge, Chiques Creek 110 cfs High ±0 11 mi
Kreutz Creek at StricklerRiver gauge, Kreutz Creek 25.4 cfs High −1.0 cfs 12 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Conewago Creek near Falmouth today?

On Oct 20, 2026, 11:15 AM EDT, the water level was 3.78 ft. Steady over the last 24 hours.

Is Conewago Creek near Falmouth rising or falling?

Steady over the last 24 hours.

Is the level of Conewago Creek near Falmouth normal?

Normal for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:01573710 (Agency page)
Coordinates
40.14931, -76.68775 (WGS84)
Vertical datum
NGVD29
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 3.78 ft 2026-10-20 15:15 Provisional
Flow 17.8 cfs 2026-10-20 15:15 Provisional
Water temperature 51 °F 2026-10-20 15:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Conewago Creek near Falmouth (usgs:01573710). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/pennsylvania/conewago-creek-near-falmouth

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.