Nivelmap
EN

Pennypack Creek at Pine Road, at Philadelphia water level

River gauge, Pennypack Creek, Pennsylvania, United States

Directions

Right now

Normal for mid-October

Water level

3.32ft Steady over the last 24 hours

Flow
38.8 cfs
Water temperature
57 °F
1 3 4 5

History

History
3.33.43.5ftOct 16Oct 17Oct 18Oct 19Oct 203.33.43.5ftOct 16Oct 18Oct 20
Water level

What this means

Pennypack Creek at Pine Road, at Philadelphia is at 3.32 ft, in the normal range for mid-October.

The level has held steady over the past 24 hours. In the last month it has stayed between 3.30 ft and 3.50 ft.

Fall is often low-water season on rivers, until steadier rain returns. The sensor also reports a water temperature of 57 °F.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Pennypack Creek at Pine Road, at Philadelphia

Normal flows mean predictable rapids and good access at most put-ins.

Weather at the gauge

No rain in the last 3 days.

17 Sat 64° 41° 0.02 in, 48% Wind 14 mph
18 Sun 57° 37° – Wind 9 mph
19 Mon 62° 42° – Wind 12 mph
20 Tue 66° 51° – Wind 13 mph
21 Wed 62° 47° – Wind 12 mph
22 Thu 65° 45° – Wind 9 mph
23 Fri 63° 49° – Wind 10 mph

Forecast: Open-Meteo

Sunrise 07:17 AM Sunset 06:15 PM Daylight 10 hr, 58 min Waxing gibbous 72%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Pennypack Cr at Lower Rhawn St Bdg, Phila.River gauge, Pennypack Cr 2.64 ft Below flood stage −0.02 ft 3.4 mi
Tacony Creek above Adams Avenue, PhiladelphiaRiver gauge, Tacony Creek 12.5 cfs Normal ±0 4.0 mi
Poquessing Creek at Grant Ave. at PhiladelphiaRiver gauge, Poquessing Creek 8.6 cfs Normal −0.4 cfs 5.0 mi
Frankford Creek at Castor Ave, PhiladelphiaRiver gauge, Frankford Creek 1.59 ft Below flood stage −0.01 ft 5.3 mi
Neshaminy Creek near LanghorneRiver gauge, Neshaminy Creek 1.24 ft Below flood stage ±0 8 mi
Wissahickon Creek at Fort WashingtonRiver gauge, Wissahickon Creek 44.3 cfs Normal −1.5 cfs 8 mi
Wissahickon Creek at Mouth, PhiladelphiaRiver gauge, Wissahickon Creek 68.3 cfs Normal −2.5 cfs 9 mi
Schuylkill River at Manayunk, PhiladelphiaRiver gauge, Schuylkill River 11.35 ft Normal −0.12 ft 9 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Pennypack Creek at Pine Road, at Philadelphia today?

On Oct 20, 2026, 06:15 PM EDT, the water level was 3.32 ft. Steady over the last 24 hours.

Is Pennypack Creek at Pine Road, at Philadelphia rising or falling?

Steady over the last 24 hours.

Is the level of Pennypack Creek at Pine Road, at Philadelphia normal?

Normal for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:01467042 (Agency page)
Coordinates
40.08973, -75.06905 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 3.32 ft 2026-10-20 22:15 Provisional
Flow 38.8 cfs 2026-10-20 22:15 Provisional
Water temperature 57 °F 2026-10-20 22:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Pennypack Creek at Pine Road, at Philadelphia (usgs:01467042). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/pennsylvania/pennypack-creek-at-pine-road-at-philadelphia

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.