Leixlip water level

Name: Leixlip water level (Office of Public Works (waterlevel.ie))
Creator: Office of Public Works (waterlevel.ie)
License: https://creativecommons.org/licenses/by/4.0/

River gauge, Ryewater, Kildare, Ireland

Directions

Within the normal range

Water level

0.30m Down 0.02 m over the last 24 hours

Measured 17 Oct 2026, 12:45 GMT+1 (23 min ago)

History

7 days

Water level Top of normal rangeBottom of normal range

What this means

Water levels are unremarkable at Leixlip, where the gauge shows 0.30 m.

The usual range here runs from −0.24 m to 0.72 m.

It is still going down, by 0.02 m over the past 24 hours. The 30-day range is 0.30 m – 0.34 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range: −0.24 m – 0.72 m
Highest on record: 2.31 m

For anglers and canoeists

This is an ordinary level for the river: most put-ins, beats and weirs behave as they usually do.

Many angling and canoe clubs check gauges like this one before heading out.

Weather at the gauge

Rain in the last 3 days: 11 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° 2° – Wind 10 km/h

18 Sun 12° 3° – Wind 7 km/h

19 Mon 12° 4° 2.7 mm, 51% Wind 16 km/h

20 Tue 14° 9° – Wind 14 km/h

21 Wed 11° 6° 39 mm, 47% Wind 31 km/h

22 Thu 10° 4° 1.2 mm, 48% Wind 19 km/h

23 Fri 9° 6° 16 mm, 70% Wind 42 km/h

Forecast: Open-Meteo

Sunrise 07:57 AM Sunset 06:27 PM Daylight 10 hr, 31 min First quarter 40%

Map

Nearby gauges

Gauge	Level	Compared with normal	24 hours	Distance
HazelhatchRiver gauge	0.22 m	Normal	−0.01 m	5.0 km
Clonee WeirRiver gauge, Tolka	0.21 m	Normal	−0.01 m	6.1 km
Anglesea RoadRiver gauge, Dodder	0.56 m	Normal	−0.02 m	18 km
HaynestownRiver gauge	0.55 m	Normal	±0	18 km
TipperRiver gauge, Morell	0.22 m	Normal	±0	20 km
BroadmeadowRiver gauge	0.17 m	Normal	−0.01 m	21 km
KillasheeRiver gauge, Broadfield	0.17 m	Normal	−0.01 m	23 km
TrimRiver gauge, Boyne	0.82 m	Normal	±0	29 km

Questions and answers

What is the typical range for the Ryewater at Leixlip?

The Office of Public Works (waterlevel.ie) gives a typical range of −0.24 m to 0.72 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.30 m on the gauge does not mean the water is that deep.

What is the water level of Leixlip today?

On 17 Oct 2026, 12:45 GMT+1, the water level was 0.30 m. Down 0.02 m over the last 24 hours.

Is Leixlip rising or falling?

Down 0.02 m over the last 24 hours.

Is the level of Leixlip normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Leixlip?

The highest level on record is 2.31 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads

Operator: Office of Public Works (waterlevel.ie)
Station code: opw:09001 (Agency page)
Coordinates: 53.36866, -6.49044 (WGS84)
Vertical datum: OD Malin Head OSGM15
Gauge zero: 27.271 m
Update interval: every 15 minutes
Licence: CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

Parameter	Last value	Time (UTC)	Quality
Water level	0.30 m	2026-10-17 11:45	Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

<iframe src="https://nivelmap.com/embed/23693?lang=en" width="360" height="230" style="border:0;max-width:100%" loading="lazy" title="Leixlip water level"></iframe>

How to cite

Office of Public Works (waterlevel.ie): Leixlip (opw:09001). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/kildare/leixlip

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.

Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer