Nivelmap
EN

Crystal Springs Creek at Bybee St, Portland water level

River gauge, Crystal Springs Creek, Oregon, United States

Directions

Right now

Normal for mid-October

Water level

1.20ft Steady over the last 24 hours

Flow
13.9 cfs
Water temperature
57 °F
-1 0 1 3

History

History
1.181.201.22ftOct 16Oct 17Oct 18Oct 19Oct 201.181.201.22ftOct 16Oct 18Oct 20
Water level

What this means

The gauge at Crystal Springs Creek at Bybee St, Portland reads 1.20 ft, a normal level for mid-October.

It has barely moved over the past 24 hours. Over the past 30 days it has moved between 1.17 ft and 1.23 ft.

Fall is often low-water season on rivers, until steadier rain returns. The water temperature at the gauge is 57 °F.

Compared with 5 years of daily readings for this time of year. How to read levels

What the stage means on the water

A normal level is usually prime time for floating and wade fishing, as long as the weather holds upstream.

Weather at the gauge

No rain in the last 3 days.

20 Tue 72° 48° – Wind 12 mph
21 Wed 73° 49° – Wind 8 mph
22 Thu 67° 46° – Wind 12 mph
23 Fri 62° 47° – Wind 5 mph
24 Sat 63° 44° – Wind 6 mph
25 Sun 65° 46° – Wind 4 mph
26 Mon 69° 47° – Wind 10 mph

Forecast: Open-Meteo

Sunrise 07:34 AM Sunset 06:18 PM Daylight 10 hr, 44 min Waxing gibbous 72%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Johnson Creek at MilwaukieRiver gauge, Johnson Creek 23.76 ft Below flood stage ±0 1.5 mi
Willamette River at PortlandTidal gauge, Willamette River 2.77 ft Below flood stage +0.95 ft 3.3 mi
Tryon Creek near Lake OswegoRiver gauge, Tryon Creek 0.5 cfs Very low ±0 3.4 mi
Fanno Creek at 56th Ave, at PortlandRiver gauge, Fanno Creek 8.34 ft Below flood stage ±0 4.6 mi
Johnson Creek at SycamoreRiver gauge, Johnson Creek 1.24 ft Below flood stage +0.02 ft 6 mi
Kelley Creek at Se 159th Drive at PortlandRiver gauge, Kelley Creek 0.1 cfs Very low ±0 7 mi
Clackamas River near Oregon CityRiver gauge, Clackamas River 22.87 ft Below flood stage −0.04 ft 7 mi
Fanno Creek at DurhamRiver gauge, Fanno Creek 1.92 ft Below flood stage +0.05 ft 7 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Crystal Springs Creek at Bybee St, Portland today?

On Oct 20, 2026, 04:00 PM PDT, the water level was 1.20 ft. Steady over the last 24 hours.

Is Crystal Springs Creek at Bybee St, Portland rising or falling?

Steady over the last 24 hours.

Is the level of Crystal Springs Creek at Bybee St, Portland normal?

Normal for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:14211542 (Agency page)
Coordinates
45.47403, -122.64172 (WGS84)
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 1.20 ft 2026-10-20 23:00 Provisional
Flow 13.9 cfs 2026-10-20 23:00 Provisional
Water temperature 57 °F 2026-10-20 23:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Crystal Springs Creek at Bybee St, Portland (usgs:14211542). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/oregon/crystal-springs-creek-at-bybee-st-portland

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.