Nivelmap
EN

Val Marie Pump No. 1 water level

River gauge, Saskatchewan, Canada

Directions

Right now

Latest reading

Water level

0.11m Steady over the last 24 hours

Flow
0.01 m³/s
-0.5 0.0 0.5

History

History
0.110.110.11mOct 11Oct 12Oct 14Oct 16Oct 170.110.110.11mOct 11Oct 14Oct 17
0.110.110.11mSep 18Sep 25Oct 2Oct 10Oct 170.110.110.11mSep 18Oct 2Oct 17
Water level Normal range (10–90 %)

What this means

The latest water level reported for Val Marie Pump No. 1 is 0.11 m. The agency publishes no normal range or warning level for this river yet, so there is nothing to judge the number against.

The level has held steady over the past 24 hours.

Over the past seven days the change adds up to 0.00 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
0.11 m – 0.11 m
Lowest and highest in 12 months
0.11 m – 0.11 m

Conditions at Val Marie Pump No. 1

Paddlers should check the trend as well as the level; summer storms can raise rivers quickly.

Flood advisories come from the provincial river forecast centre.

Weather at the gauge

No rain in the last 3 days.

17 Sat 23° 0° – Wind 34 km/h
18 Sun 12° 2° – Wind 16 km/h
19 Mon 16° 0° – Wind 31 km/h
20 Tue 15° 8° – Wind 21 km/h
21 Wed 15° 6° – Wind 29 km/h
22 Thu 21° 9° – Wind 20 km/h
23 Fri 13° 6° – Wind 30 km/h

Forecast: Open-Meteo

Sunrise 07:36 AM Sunset 06:19 PM Daylight 10 hr, 43 min First quarter 44%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Huff Lake Gravity CanalCanal gauge 0.00 m³/s No reference yet ±0 2.0 km
Huff LakeLake 815.55 m Very high +0.01 m 2.8 km
Huff Lake Pumping CanalCanal gauge 824.47 m No reference yet −0.01 m 2.8 km
Newton LakeLake 802.63 m Normal +0.01 m 7.3 km
Denniel Creek near Val MarieRiver gauge, Denniel Creek 1.24 m Normal ±0 12 km
Notukeu Creek above Admiral ReservoirRiver gauge, Notukeu Creek 0.70 m Normal ±0 43 km
Frenchman River at international boundaryRiver gauge, Frenchman River 1.30 m Below flood stage −0.01 m 57 km
Illerbrun Creek near SimmieRiver gauge, Illerbrun Creek 2.57 m High ±0 70 km

Questions and answers

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.11 m on the gauge does not mean the water is that deep.

What is the water level of Val Marie Pump No. 1 today?

On Oct 17, 2026, 04:35 PM CST, the water level was 0.11 m. Steady over the last 24 hours.

Is Val Marie Pump No. 1 rising or falling?

Steady over the last 24 hours. Steady over the last 7 days.

Is the level of Val Marie Pump No. 1 normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

Environment and Climate Change Canada – Water Survey of Canada publishes a new reading every hour. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from Environment and Climate Change Canada – Water Survey of Canada, the official operator of this gauge, and are published under the Open Government Licence – Canada. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment and Climate Change Canada – Water Survey of Canada
Station code
eccc:11AC068 (Agency page)
Coordinates
49.36239, -107.84928 (WGS84)
Vertical datum
station datum (assumed datum)
Update interval
every hour
Licence
Open Government Licence – Canada. Contains information licensed under the Open Government Licence – Canada

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.11 m 2026-10-17 22:35 Provisional
Flow 0.01 m³/s 2026-10-17 22:35 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment and Climate Change Canada – Water Survey of Canada: Val Marie Pump No. 1 (eccc:11AC068). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/canada/saskatchewan/val-marie-pump-no-1

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.