Nivelmap
EN

Fraser River at Port Mann Pumping Station water level

River gauge, Fraser River, British Columbia, Canada

Directions

Right now

Very high for mid-October

Water level

3.47m Down 0.45 m over the last 24 hours

3.0 3.2 3.5

History

History
234mOct 12Oct 14Oct 16Oct 18Oct 19234mOct 12Oct 16Oct 19
234mSep 19Sep 27Oct 4Oct 12Oct 19234mSep 20Oct 4Oct 19
Water level Normal range (10–90 %)

What this means

High water at Fraser River at Port Mann Pumping Station: the latest reading is 3.47 m, well above normal for mid-October.

The median for mid-October is 3.13 m, based on 9 years of readings, so the water level is 0.33 m above typical.

It is still going down, by 0.45 m over the past 24 hours. The 30-day range is 1.67 m – 4.13 m.

That stands out in fall, when many rivers are usually near their lowest.

Compared with 9 years of daily readings for this time of year. How to read levels

Key numbers

Median for this date
3.13 m0.33 m above the median for this date
Normal for this date
2.88 m – 3.46 m8 years in 10 fall in this range (9 years of records)
Lowest and highest in 30 days
1.67 m – 4.13 m
Lowest and highest in 12 months
3.02 m – 3.54 m

High water: what to watch for

Fast water is stronger than it looks. Even shallow water across a road can move a car, and riverbanks can be undercut and give way without warning.

Upstream gauges on the same river usually show a rise first, which is a useful early warning.

About the Fraser River

Fraser River

The Fraser River is the longest river within British Columbia, Canada, rising at Fraser Pass near Blackrock Mountain in the Rocky Mountains and flowing for 1,375 kilometres (854 mi), into the Strait of Georgia just south of the City of Vancouver. The river's annual discharge at its mouth is 112 cubic kilometres (27 mi3) or 3,550 cubic metres per second (125,000 cu ft/s), and each year, it discharges about 20 million tons of sediment into the ocean.

Read more on Wikipedia

Text and image from Wikipedia and Wikimedia Commons, licensed under CC BY-SA.

Weather at the gauge

Rain in the last 3 days: 1.9 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

19 Mon 14° 6° – Wind 8 km/h
20 Tue 18° 6° – Wind 10 km/h
21 Wed 18° 8° – Wind 5 km/h
22 Thu 15° 8° – Wind 8 km/h
23 Fri 14° 7° – Wind 7 km/h
24 Sat 14° 6° – Wind 6 km/h
25 Sun 15° 6° – Wind 6 km/h

Forecast: Open-Meteo

Sunrise 07:39 AM Sunset 06:15 PM Daylight 10 hr, 36 min First quarter 62%

Map

Other gauges on the Fraser River

Gauge Level Compared with normal 24 hours Distance
Fraser River at Deas Island TunnelRiver gauge, Fraser River 1.50 m Very high −0.25 m 21 km
Fraser River at WhonockRiver gauge, Fraser River 3.32 m Very low −0.58 m 26 km
Fraser River at StevestonRiver gauge, Fraser River 3.68 m Very high −0.20 m 29 km
Fraser River at MissionRiver gauge, Fraser River 0.76 m Low −0.31 m 39 km
Fraser River at CannorRiver gauge, Fraser River 1.78 m Low −0.01 m 55 km
Fraser River at HopeRiver gauge, Fraser River 4.09 m Normal −0.10 m 101 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Coquitlam River at Port CoquitlamRiver gauge, Coquitlam River 7.98 m Normal −0.01 m 6.1 km
Pitt River near Port CoquitlamRiver gauge, Pitt River 3.39 m High −0.18 m 7.2 km
Coquitlam Lake ForebayReservoir 45.07 m Low −0.05 m 16 km
Or Creek near CoquitlamRiver gauge, Or Creek 3.15 m Very low −0.03 m 18 km
Alouette River near HaneyRiver gauge, Alouette River 0.77 m Normal ±0 18 km
North Alouette River at 232ND Street, Maple RidgeRiver gauge, North Alouette River 0.19 m Normal −0.03 m 18 km
Nicomekl River at 203 Street, LangleyRiver gauge, Nicomekl River 0.89 m Normal −0.01 m 18 km
Cedar Creek above the MouthRiver gauge, Cedar Creek 1.36 m Very low −0.02 m 18 km

Questions and answers

What is a normal level for the Fraser River at Port Mann Pumping Station in mid-October?

The median for mid-October is 3.13 m. In 8 years out of 10 the reading falls between 2.88 m and 3.46 m, based on 9 years of records.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 3.47 m on the gauge does not mean the water is that deep.

What is the water level of Fraser River at Port Mann Pumping Station today?

On Oct 19, 2026, 12:40 PM PDT, the water level was 3.47 m. Down 0.45 m over the last 24 hours.

Is Fraser River at Port Mann Pumping Station rising or falling?

Down 0.45 m over the last 24 hours. Up 0.18 m over the last 7 days.

Is the level of Fraser River at Port Mann Pumping Station normal?

Very high for mid-October. Compared with 9 years of daily readings for this time of year.

How often is this data updated?

Environment and Climate Change Canada – Water Survey of Canada publishes a new reading every hour. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from Environment and Climate Change Canada – Water Survey of Canada, the official operator of this gauge, and are published under the Open Government Licence – Canada. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment and Climate Change Canada – Water Survey of Canada
Station code
eccc:08MH126 (Agency page)
Coordinates
49.21780, -122.82466 (WGS84)
Vertical datum
station datum (assumed datum)
Update interval
every hour
Licence
Open Government Licence – Canada. Contains information licensed under the Open Government Licence – Canada

Published series

ParameterLast valueTime (UTC)Quality
Water level 3.47 m 2026-10-19 19:40 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment and Climate Change Canada – Water Survey of Canada: Fraser River at Port Mann Pumping Station (eccc:08MH126). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/canada/british-columbia/fraser-river-at-port-mann-pumping-station

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.