Nivelmap
EN

Braintree water level

River gauge, Pods Brook, Essex, United Kingdom

Directions

Right now

Within the normal range

Water level

0.20m Steady over the last 24 hours

0.5 1.0 Highest onrecord 1.31 m Lowest on record 0.18 m

History

History
0.190.20mOct 16Oct 16Oct 17Oct 17Oct 18Bottom of normal range0.190.20mOct 16Oct 17Oct 18Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

Pods Brook at Braintree is at 0.20 m, within its typical range.

The usual range here runs from 0.20 m to 0.80 m.

It has barely moved over the past 24 hours. In the last month it has stayed between 0.19 m and 0.20 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.20 m – 0.80 m
Highest on record
1.31 mFebruary 9, 2024
Lowest on record
0.18 mSeptember 10, 2023

Fishing and paddling

Paddlers and anglers can expect the river much as they know it, though a heavy shower upstream can change that within hours.

Flood alerts and warnings come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 1.3 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 13° 6° 0.4 mm Wind 22 km/h
18 Sun 14° 7° 4.5 mm, 86% Wind 26 km/h
19 Mon 14° 10° 2.0 mm, 83% Wind 17 km/h
20 Tue 14° 11° 0.9 mm, 37% Wind 17 km/h
21 Wed 12° 10° 11 mm, 44% Wind 22 km/h
22 Thu 14° 5° 0.6 mm, 30% Wind 23 km/h
23 Fri 12° 8° 10 mm, 67% Wind 40 km/h

Forecast: Open-Meteo

Sunrise 07:28 AM Sunset 06:00 PM Daylight 10 hr, 32 min First quarter 46%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
StistedRiver gauge, River Blackwater 0.28 m Very high −0.01 m 6.0 km
FelstedRiver gauge, River Chelmer 0.14 m Low ±0 7.5 km
Copford HallRiver gauge, River Pant 0.27 m High ±0 10 km
ChurchendRiver gauge, River Chelmer 0.11 m Very low ±0 10 km
Guithavon ValleyRiver gauge, River Brain 0.16 m Low −0.01 m 12 km
Appleford BridgeRiver gauge, River Blackwater 0.37 m Normal ±0 13 km
Poole StreetRiver gauge, River Colne 0.07 m Normal ±0 14 km
Earls ColneRiver gauge, River Colne 0.11 m Very low −0.01 m 14 km

Questions and answers

What is the typical range for Pods Brook at Braintree?

The Environment Agency gives a typical range of 0.20 m to 0.80 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.20 m on the gauge does not mean the water is that deep.

What is the water level of Braintree today?

On 18 Oct 2026, 03:00 BST, the water level was 0.20 m. Steady over the last 24 hours.

Is Braintree rising or falling?

Steady over the last 24 hours.

Is the level of Braintree normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Braintree?

The highest level on record is 1.31 m on February 9, 2024. The lowest is 0.18 m on September 10, 2023.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E31329 (Agency page)
Coordinates
51.88132, 0.51736 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation – – –
Water level 0.20 m 2026-10-18 02:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Braintree (ea:E31329). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/essex/braintree

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.