Nivelmap
EN

Henson Creek at Lake City water level

River gauge, Henson Creek, Colorado, United States

Directions

Right now

High for mid-October

Water level

7.15ft Steady over the last 24 hours

Flow
66.7 cfs
5 6 8 9

History

History
7.157.207.25ftOct 16Oct 17Oct 18Oct 19Oct 207.157.207.25ftOct 16Oct 18Oct 20
Water level

What this means

The gauge at Henson Creek at Lake City shows 7.15 ft, above normal for mid-October.

It has barely moved over the past 24 hours. Over the past 30 days it has moved between 7.13 ft and 7.25 ft.

That stands out in fall, when many rivers are usually near their lowest.

Compared with 5 years of daily readings for this time of year. How to read levels

What the stage means on the water

Fast, high water is not the time for casual paddling. Strainers, debris and cold water make an unplanned swim dangerous.

Weather at the gauge

No rain in the last 3 days.

20 Tue 58° 36° – Wind 10 mph
21 Wed 56° 40° 0.03 in, 70% Wind 12 mph
22 Thu 44° 40° 1.74 in, 98% Wind 5 mph
23 Fri 43° 29° 0.30 in, 98% Wind 9 mph
24 Sat 47° 29° 0.33 in, 54% Wind 7 mph
25 Sun 43° 27° 0.16 in, 54% Wind 6 mph
26 Mon 46° 25° – Wind 5 mph

Forecast: Open-Meteo

Sunrise 07:23 AM Sunset 06:26 PM Daylight 11 hr, 3 min Waxing gibbous 70%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Lake Fork below Lake San Cristobal near Lake CityRiver gauge, Lake Fork 114 cfs Very high +2.0 cfs 3.1 mi
Silver Jack Reservoir near CimarronReservoir, Silver Jack Reservoir 8,860.94 ft High +0.28 ft 19 mi
Lake Fork at GateviewRiver gauge, Lake Fork 182 cfs Very high ±0 19 mi
Uncompahgre River near OurayRiver gauge, Uncompahgre River 88.1 cfs High −4.6 cfs 20 mi
Cimarron River near CimarronRiver gauge, Cimarron River 1.24 ft Below flood stage −0.01 ft 20 mi
Cement Creek at SilvertonRiver gauge, Cement Creek 34.6 cfs Very high ±0 24 mi
Animas River at SilvertonRiver gauge, Animas River 154 cfs Very high −5.0 cfs 24 mi
Mineral Creek at SilvertonRiver gauge, Mineral Creek 139 cfs Very high +4.0 cfs 25 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Henson Creek at Lake City today?

On Oct 20, 2026, 10:30 AM MDT, the water level was 7.15 ft. Steady over the last 24 hours.

Is Henson Creek at Lake City rising or falling?

Steady over the last 24 hours.

Is the level of Henson Creek at Lake City normal?

High for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:09124010 (Agency page)
Coordinates
38.02567, -107.31635 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 7.15 ft 2026-10-20 16:30 Provisional
Flow 66.7 cfs 2026-10-20 16:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Henson Creek at Lake City (usgs:09124010). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/colorado/henson-creek-at-lake-city

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.