Nivelmap
EN

Malad River at Woodruff water level

River gauge, Malad River, Idaho, United States

Directions

Right now

Very low for mid-October

Water level

2.42ft Steady over the last 24 hours

Flow
6.7 cfs
0 1 3 4

History

History
2.382.402.42ftOct 16Oct 16Oct 17Oct 18Oct 182.382.402.42ftOct 16Oct 17Oct 18
Water level

What this means

The Malad River at Woodruff is running far below normal at 2.42 ft.

The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. In the last month it has stayed between 2.36 ft and 2.42 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Malad River at Woodruff

Low water exposes gravel bars that make good wading access, but some boat ramps may be left high and dry.

Weather at the gauge

No rain in the last 3 days.

18 Sun 70° 49° – Wind 12 mph
19 Mon 68° 51° – Wind 13 mph
20 Tue 68° 53° 0.01 in, 28% Wind 7 mph
21 Wed 72° 50° – Wind 9 mph
22 Thu 71° 51° 0.16 in, 68% Wind 10 mph
23 Fri 52° 47° 0.75 in, 84% Wind 9 mph
24 Sat 58° 42° – Wind 5 mph

Forecast: Open-Meteo

Sunrise 07:45 AM Sunset 06:44 PM Daylight 10 hr, 59 min First quarter 52%

Map

Other gauges on the Malad River

Gauge Level Compared with normal 24 hours Distance
Malad River near Bear River CityRiver gauge, Malad River 8.91 ft No reference yet ±0 31 mi
Malad River near GoodingRiver gauge, Malad River 0.0 cfs Very low ±0 144 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Newton ReservoirReservoir 4,726.70 ft Very low 16 mi
Bear River at Idaho-Utah State LineRiver gauge, Bear River 9.10 ft Below flood stage −0.03 ft 16 mi
Bear River near SmithfieldRiver gauge, Bear River 402 cfs Low ±0 22 mi
Com F Logan River above St D and Cache Hl Can near LoganRiver gauge, Com F Logan River 92.4 cfs Very low ±0 30 mi
Logan River above State Dam, near LoganRiver gauge, Logan River 2.57 ft Below flood stage +0.01 ft 30 mi
Cache Highline Canal near Logan, UtahCanal gauge, Cache Highline Canal 0.0 cfs Low ±0 31 mi
Bear River near CorinneRiver gauge, Bear River 3.77 ft Below flood stage −0.12 ft 32 mi
Hyrum ReservoirReservoir 4,637.55 ft Very low 34 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Malad River at Woodruff today?

On Oct 18, 2026, 12:30 PM MDT, the water level was 2.42 ft. Steady over the last 24 hours.

Is Malad River at Woodruff rising or falling?

Steady over the last 24 hours.

Is the level of Malad River at Woodruff normal?

Very low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:10125500 (Agency page)
Coordinates
42.02972, -112.22958 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 2.42 ft 2026-10-18 18:30 Provisional
Flow 6.7 cfs 2026-10-18 18:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Malad River at Woodruff (usgs:10125500). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-states/idaho/malad-river-at-woodruff

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.