Nivelmap
EN

Eagle Creek below South Fork near Alto water level

River gauge, Eagle Creek, New Mexico, United States

Directions

Right now

Low for mid-October

Water level

6.46ft Up 0.95 ft over the last 24 hours

Flow
0.0 cfs
5 6 8 9

History

History
5.56.06.5ftOct 16Oct 17Oct 18Oct 19Oct 205.56.06.5ftOct 16Oct 18Oct 20
Water level

What this means

Eagle Creek below South Fork near Alto is running below normal at 6.46 ft.

It has risen 0.95 ft over the past 24 hours. In the last month it has stayed between 5.50 ft and 6.47 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.

Compared with 5 years of daily readings for this time of year. How to read levels

Floating and fishing near Eagle Creek below South Fork near Alto

Low water exposes gravel bars that make good wading access, but some boat ramps may be left high and dry.

Weather at the gauge

No rain in the last 3 days.

19 Mon 63° 46° 0.06 in, 24% Wind 12 mph
20 Tue 63° 47° – Wind 12 mph
21 Wed 68° 48° 0.03 in Wind 8 mph
22 Thu 68° 51° 0.02 in, 42% Wind 12 mph
23 Fri 61° 50° 0.23 in, 61% Wind 13 mph
24 Sat 61° 47° 0.83 in, 59% Wind 8 mph
25 Sun 48° 43° 1.18 in, 30% Wind 8 mph

Forecast: Open-Meteo

Sunrise 07:12 AM Sunset 06:25 PM Daylight 11 hr, 13 min Waxing gibbous 69%

Map

Other gauges on Eagle Creek

Gauge Level Compared with normal 24 hours Distance
Eagle Creek at AltoRiver gauge, Eagle Creek 3.96 ft No reference yet +0.04 ft 2.2 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
North Fork Eagle Creek near AltoRiver gauge, North Fork Eagle Creek 1.2 cfs Normal +1.0 cfs 1.5 mi
Alto Reservoir above Diversion at AltoReservoir, Alto Reservoir 4.33 ft No reference yet ±0 2.7 mi
Rio Ruidoso at RuidosoRiver gauge, Rio Ruidoso 14.5 cfs High −9.0 cfs 3.9 mi
Rio Ruidoso at HollywoodRiver gauge, Rio Ruidoso 2.13 ft Below flood stage +0.04 ft 7 mi
Tularosa Creek near BentRiver gauge, Tularosa Creek 9.3 cfs Low +0.3 cfs 20 mi
Malpais Spring near OscuraRiver gauge, Malpais Spring 6.3 cfs Very high ±0 35 mi
Salt Creek near TularosaRiver gauge, Salt Creek 0.8 cfs Very high +0.4 cfs 40 mi
Rio Penasco near DunkenRiver gauge, Rio Penasco 4.5 cfs Low +0.5 cfs 47 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Eagle Creek below South Fork near Alto today?

On Oct 20, 2026, 09:10 AM MDT, the water level was 6.46 ft. Up 0.95 ft over the last 24 hours.

Is Eagle Creek below South Fork near Alto rising or falling?

Up 0.95 ft over the last 24 hours.

Is the level of Eagle Creek below South Fork near Alto normal?

Low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:08387600 (Agency page)
Coordinates
33.39285, -105.72334 (WGS84)
Vertical datum
NGVD29
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 6.46 ft 2026-10-20 15:10 Provisional
Flow 0.0 cfs 2026-10-20 15:10 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Eagle Creek below South Fork near Alto (usgs:08387600). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/new-mexico/eagle-creek-below-south-fork-near-alto

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.