Nivelmap
EN

St Joseph River at Montpelier OH water level

River gauge, St Joseph River, Ohio, United States

Directions

Right now

Latest reading

Water level

4.74ft Down 0.17 ft over the last 24 hours

3 4 5 6

History

History
4.85.05.35.5ftOct 16Oct 17Oct 18Oct 19Oct 194.85.05.35.5ftOct 16Oct 18Oct 19
Water level

What this means

The U.S. Geological Survey has the St Joseph River at Montpelier OH at 4.74 ft. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It is still going down, by 0.17 ft over the past 24 hours. The 30-day range is 4.74 ft – 5.50 ft.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Paddling and fishing conditions

Compare today with the chart before you go; local outfitters often know which stage suits their stretch.

Weather at the gauge

Rain in the last 3 days: 0.11 in. Rain that falls upstream can take hours or days to show up at a river gauge.

19 Mon 65° 34° – Wind 5 mph
20 Tue 66° 38° – Wind 6 mph
21 Wed 67° 46° – Wind 5 mph
22 Thu 69° 48° – Wind 3 mph
23 Fri 68° 49° – Wind 8 mph
24 Sat 69° 47° – Wind 8 mph
25 Sun 71° 50° – Wind 14 mph

Forecast: Open-Meteo

Sunrise 07:57 AM Sunset 06:51 PM Daylight 10 hr, 54 min First quarter 63%

Map

Other gauges on the St Joseph River

Gauge Level Compared with normal 24 hours Distance
St Joseph River near Newville INRiver gauge, St Joseph River 4.60 ft Below flood stage −0.20 ft 17 mi

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
West Branch St. Joseph River near Nettle LakeRiver gauge, West Branch St. Joseph River 27.6 cfs Normal −3.2 cfs 7 mi
East Branch St Joseph River at Territorial Road near WaldronRiver gauge, East Branch St Joseph River 35.7 cfs Normal −2.8 cfs 11 mi
Tiffin River at Stryker OHRiver gauge, Tiffin River 4.63 ft Below flood stage −0.34 ft 11 mi
Fish Creek at HamiltonRiver gauge, Fish Creek 3.38 ft Below flood stage −0.02 ft 15 mi
Unnamed Tributary to Lost Creek near Farmer OHRiver gauge, Unnamed Tributary to Lost Creek 0.6 cfs Normal −0.1 cfs 16 mi
Tiffin River near Evansport OHRiver gauge, Tiffin River 271 cfs Normal −43.0 cfs 17 mi
Bean Creek at Powers OHRiver gauge, Bean Creek 8.43 ft Below flood stage +0.01 ft 20 mi
Lime Creek at Ranger Highway near MorenciRiver gauge, Lime Creek 13.9 cfs Normal −1.8 cfs 22 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of St Joseph River at Montpelier OH today?

On Oct 19, 2026, 07:30 PM EDT, the water level was 4.74 ft. Down 0.17 ft over the last 24 hours.

Is St Joseph River at Montpelier OH rising or falling?

Down 0.17 ft over the last 24 hours.

Is the level of St Joseph River at Montpelier OH normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:04177347 (Agency page)
Coordinates
41.58641, -84.61422 (WGS84)
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 4.74 ft 2026-10-19 23:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: St Joseph River at Montpelier OH (usgs:04177347). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/ohio/st-joseph-river-at-montpelier-oh

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.