Anchor Reservoir water level
Reservoir, Wyoming, United States
Right now
Very high for mid-October
Surface elevation
- Water stored
- 883 acre‑ft
History
202120222023202420252026
What this means
At 6,369.50 ft, Anchor Reservoir is holding more water than usual for mid-October.
The median for mid-October is 6,358.10 ft, based on 36 years of readings, so the lake level is 11.40 ft above typical. On the same day last year the reading was 6,362.61 ft, a difference of +6.89 ft.
It is on the way up, by 1.04 ft over the past week. The 30-day range is 6,368.46 ft – 6,369.95 ft.
Many reservoirs are drawn down through summer and fall; most of the refill comes later, with winter rain or spring snowmelt.
Compared with 36 years of daily readings for this time of year. How to read levels
Key numbers
- Median for this date
- 6,358.10 ft11.40 ft above the median for this date
- Normal for this date
- 6,350.60 ft – 6,368.08 ft8 years in 10 fall in this range (36 years of records)
- Same day last year
- 6,362.61 ft+6.89 ft
- Lowest and highest in 30 days
- 6,368.46 ft – 6,369.95 ft
- Lowest and highest in 12 months
- 6,361.85 ft – 6,377.58 ft
Boating and fishing at Anchor Reservoir
When a lake runs high, docks and swimming areas may close for a while and floating logs become a real hazard for boats.
Conditions at the shore change with the level, so check with the agency that runs the lake before a trip.
Weather at the gauge
No rain in the last 3 days.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Pilot Butte ReservoirReservoir | 5,453.63 ft | High | 32 mi | |
| Bull Lake ReservoirReservoir | 5,775.57 ft | Normal | 33 mi | |
| Wind River above Red Creek, near DuboisRiver gauge, Wind River | 3.12 ft | Below flood stage | −0.06 ft | 35 mi |
| Wind River near KinnearRiver gauge, Wind River | 4.34 ft | Below flood stage | −0.11 ft | 36 mi |
| Dinwoody Creek above Lakes, near BurrisRiver gauge, Dinwoody Creek | 108 cfs | Very high | −10.0 cfs | 37 mi |
| Boysen ReservoirReservoir | 4,711.00 ft | Normal | 37 mi | |
| Muddy Creek near ShoshoniRiver gauge, Muddy Creek | 9.3 cfs | Normal | ±0 | 38 mi |
| Bull Lake Creek above Bull LakeRiver gauge, Bull Lake Creek | 308 cfs | Very high | −46.0 cfs | 39 mi |
Questions and answers
Is Anchor Reservoir higher than last year?
Yes, it is 6.89 ft higher than on the same day last year, when the reading was 6,362.61 ft.
What is a normal level for Anchor Reservoir in mid-October?
The median for mid-October is 6,358.10 ft. In 8 years out of 10 the reading falls between 6,350.60 ft and 6,368.08 ft, based on 36 years of records.
Is Anchor Reservoir really 6,369.50 ft deep?
No. 6,369.50 ft is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.
What is the water level of Anchor Reservoir today?
On Oct 16, 2026, the surface elevation was 6,369.50 ft. Up 1.04 ft over the last 7 days.
Is Anchor Reservoir rising or falling?
Up 1.04 ft over the last 7 days.
Is the level of Anchor Reservoir normal?
Very high for mid-October. Compared with 36 years of daily readings for this time of year.
How often is this data updated?
The U.S. Bureau of Reclamation publishes a new reading once a day. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- U.S. Bureau of Reclamation
- Station code
usbr:262(Agency page)- Coordinates
43.66390, -108.82420(WGS84)- Update interval
- once a day
- Licence
- Public domain. Data: U.S. Bureau of Reclamation (RISE), provisional data subject to revision
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Surface elevation | 6,369.50 ft | 2026-10-16 06:00 | Provisional |
| Water stored | 883 acre‑ft | 2026-10-16 06:00 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
U.S. Bureau of Reclamation: Anchor Reservoir (usbr:262). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-states/wyoming/anchor-reservoir
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer