Nivelmap
EN

Antoine Creek at Us Highway 97 near Ellisforde water level

River gauge, Antoine Creek, Washington, United States

Directions

Right now

Very low for mid-October

Water level

1.28ft Steady over the last 24 hours

Flow
0.6 cfs
0 1 3 4

History

History
1.271.281.29ftOct 16Oct 17Oct 18Oct 19Oct 201.271.281.29ftOct 16Oct 18Oct 20
Water level

What this means

Low water at Antoine Creek at Us Highway 97 near Ellisforde: the gauge reads 1.28 ft, far below normal for mid-October.

The level has held steady over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. The 30-day range is 1.27 ft – 1.29 ft.

Fall is often low-water season on rivers, and it usually takes a few days of steady rain to change that.

Compared with 5 years of daily readings for this time of year. How to read levels

Paddling and fishing conditions

At low levels, plan for shorter paddling trips and expect to walk your boat through a few shoals.

Weather at the gauge

No rain in the last 3 days.

17 Sat 69° 47° – Wind 11 mph
18 Sun 65° 43° – Wind 6 mph
19 Mon 64° 45° – Wind 5 mph
20 Tue 65° 44° – Wind 9 mph
21 Wed 67° 41° – Wind 8 mph
22 Thu 65° 43° – Wind 7 mph
23 Fri 61° 40° – Wind 11 mph

Forecast: Open-Meteo

Sunrise 07:26 AM Sunset 06:00 PM Daylight 10 hr, 34 min Waxing gibbous 72%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Bonaparte Creek at TonasketRiver gauge, Bonaparte Creek 1.07 ft Very low −0.01 ft 4.3 mi
Okanogan River near TonasketRiver gauge, Okanogan River 3.96 ft Very low ±0 9 mi
Okanogan River at OrovilleRiver gauge, Okanogan River 3.29 ft Lowest on record ±0 12 mi
Osoyoos Lake near OrovilleLake, Osoyoos Lake 910.97 ft Very high +0.03 ft 14 mi
Ninemile Creek at Eastlake Road near OrovilleRiver gauge, Ninemile Creek 0.3 cfs Normal ±0 15 mi
Similkameen River near NighthawkRiver gauge, Similkameen River 2.18 ft Very low ±0 18 mi
Johnson Creek near RiversideRiver gauge, Johnson Creek 4.5 cfs Normal +0.2 cfs 19 mi
North Fork Salmon Creek near ConconullyRiver gauge, North Fork Salmon Creek 4.2 cfs Low +0.2 cfs 20 mi

Questions and answers

Is gage height the same as water depth?

No. Gage height is measured from a fixed reference point chosen by the agency, so a reading of 10 ft does not mean the river is 10 ft deep.

What is the water level of Antoine Creek at Us Highway 97 near Ellisforde today?

On Oct 20, 2026, 04:00 PM PDT, the water level was 1.28 ft. Steady over the last 24 hours.

Is Antoine Creek at Us Highway 97 near Ellisforde rising or falling?

Steady over the last 24 hours.

Is the level of Antoine Creek at Us Highway 97 near Ellisforde normal?

Very low for mid-October. Compared with 5 years of daily readings for this time of year.

How often is this data updated?

The U.S. Geological Survey publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the U.S. Geological Survey, the official operator of this gauge, and are in the public domain. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
U.S. Geological Survey
Station code
usgs:12444290 (Agency page)
Coordinates
48.75927, -119.40921 (WGS84)
Vertical datum
NAVD88
Update interval
every 15 minutes
Licence
Public domain. Data: U.S. Geological Survey (USGS), provisional data subject to revision

Published series

ParameterLast valueTime (UTC)Quality
Water level 1.28 ft 2026-10-20 23:00 Provisional
Flow 0.6 cfs 2026-10-20 23:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

U.S. Geological Survey: Antoine Creek at Us Highway 97 near Ellisforde (usgs:12444290). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-states/washington/antoine-creek-at-us-highway-97-near-ellisforde

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.