Ballinacarrig water level
River gauge, Burren, Carlow, Ireland
Right now
Below the normal range
Water level
History
What this means
At 0.35 m, the Burren at Ballinacarrig is below normal.
The usual range here runs from 0.35 m to 1.08 m.
The level is falling, down 0.01 m over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. Over the past 30 days it has moved between 0.35 m and 0.36 m.
Autumn rain usually starts to lift rivers again after the summer low.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- 0.35 m – 1.08 m
- Highest on record
- 2.16 m
On the river at Ballinacarrig
Low, clear water makes fish wary, and anglers often do better early and late in the day. For canoeists, shallow riffles mean scraped hulls and the odd portage.
Flood warnings for the area come from the OPW and Met Éireann.
Weather at the gauge
Rain in the last 3 days: 12 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| CarlowRiver gauge, Barrow | 0.42 m | Normal | +0.03 m | 2.9 km |
| Barrow New BridgeRiver gauge, Barrow | 0.37 m | Normal | ±0 | 3.3 km |
| Tullow Town Bridge U/SRiver gauge, Slaney | 0.17 m | Normal | −0.02 m | 11 km |
| LevitstownRiver gauge, Barrow | 1.80 m | Normal | +0.01 m | 13 km |
| Royal OakRiver gauge, Barrow | 0.46 m | Normal | +0.02 m | 15 km |
| DerrybrockRiver gauge, Stradbally | 0.28 m | Normal | −0.02 m | 27 km |
| Dinin BridgeRiver gauge, Dinin | 0.17 m | Normal | −0.02 m | 29 km |
| Archers GroveRiver gauge, Nore | 0.40 m | Low | −0.02 m | 30 km |
Questions and answers
What is the typical range for the Burren at Ballinacarrig?
The Office of Public Works (waterlevel.ie) gives a typical range of 0.35 m to 1.08 m for this gauge.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 0.35 m on the gauge does not mean the water is that deep.
What is the water level of Ballinacarrig today?
On 17 Oct 2026, 23:00 GMT+1, the water level was 0.35 m. Down 0.01 m over the last 24 hours.
Is Ballinacarrig rising or falling?
Down 0.01 m over the last 24 hours.
Is the level of Ballinacarrig normal?
Below the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Ballinacarrig?
The highest level on record is 2.16 m.
How often is this data updated?
The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Office of Public Works (waterlevel.ie)
- Station code
opw:14013(Agency page)- Coordinates
52.82426, -6.89815(WGS84)- Vertical datum
- OD Malin Head OSGM15
- Gauge zero
- 50.787 m
- Update interval
- every 15 minutes
- Licence
- CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 0.35 m | 2026-10-17 22:00 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Office of Public Works (waterlevel.ie): Ballinacarrig (opw:14013). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/carlow/ballinacarrig
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer