Nivelmap
EN

Rathkeale water level

River gauge, Deel, Limerick, Ireland

Directions

Right now

Within the normal range

Water level

0.80m Down 0.05 m over the last 24 hours

0 1 3 4 Highest onrecord 3.80 m

History

History
0.800.820.84mOct 16Oct 16Oct 16Oct 17Oct 170.800.820.84mOct 16Oct 16Oct 17
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Rathkeale reads 0.80 m, a normal level.

The usual range here runs from 0.32 m to 1.68 m.

The level is falling, down 0.05 m over the past 24 hours. Over the past 30 days it has moved between 0.80 m and 0.87 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.32 m – 1.68 m
Highest on record
3.80 m

On the river at Rathkeale

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the OPW and Met Éireann.

Weather at the gauge

Rain in the last 3 days: 9.0 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° 1° – Wind 8 km/h
18 Sun 12° 0° – Wind 6 km/h
19 Mon 12° -1° – Wind 8 km/h
20 Tue 14° 4° 4.0 mm, 49% Wind 22 km/h
21 Wed 11° 6° 7.7 mm, 57% Wind 39 km/h
22 Thu 12° 6° 0.6 mm, 63% Wind 24 km/h
23 Fri 8° 5° 26 mm, 86% Wind 47 km/h

Forecast: Open-Meteo

Sunrise 08:05 AM Sunset 06:39 PM Daylight 10 hr, 34 min First quarter 38%

Map

Other gauges on the Deel

Gauge Level Compared with normal 24 hours Distance
Grange BridgeEstuary gauge, Deel 0.56 m Normal −0.04 m 8.2 km
Deel BridgeEstuary gauge, Deel 0.28 m Normal −0.02 m 11 km
Gortboy HotelRiver gauge, Deel 0.31 m Normal −0.02 m 11 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
CastlerobertsRiver gauge, Maigue 0.83 m Normal −0.01 m 12 km
CroomRiver gauge, Maigue 0.50 m Normal −0.01 m 15 km
AthlaccaRiver gauge, Morningstar 0.24 m Normal ±0 21 km
Gray's BridgeRiver gauge, Camoge 0.30 m Normal ±0 22 km
BrureeRiver gauge, Maigue 0.24 m Normal −0.03 m 22 km
Athea D/SRiver gauge, Galey 0.41 m Normal −0.03 m 24 km
Athea U/SRiver gauge, Galey 0.44 m Normal −0.03 m 24 km

Questions and answers

What is the typical range for the Deel at Rathkeale?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.32 m to 1.68 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.80 m on the gauge does not mean the water is that deep.

What is the water level of Rathkeale today?

On 17 Oct 2026, 09:30 GMT+1, the water level was 0.80 m. Down 0.05 m over the last 24 hours.

Is Rathkeale rising or falling?

Down 0.05 m over the last 24 hours.

Is the level of Rathkeale normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Rathkeale?

The highest level on record is 3.80 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:24013 (Agency page)
Coordinates
52.52096, -8.94355 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
28.693 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.80 m 2026-10-17 08:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Rathkeale (opw:24013). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/limerick/rathkeale

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.