Steepbank River near Fort McMurray water level
River gauge, Steepbank River, Alberta, Canada
Right now
Normal for mid-October
Water level
- Flow
- 2.28 m³/s
History
20252026
What this means
Water levels are unremarkable at Steepbank River near Fort McMurray, where the gauge shows 96.99 m.
The median for mid-October is 97.00 m, based on 14 years of readings, so the water level is 0.01 m below typical. On the same day last year the reading was 96.92 m, a difference of +0.07 m.
It is on the way up, by 0.01 m over the past 24 hours. The 30-day range is 96.88 m – 96.99 m.
Fall is often low-water season on rivers, until steadier rain returns.
Compared with 14 years of daily readings for this time of year. How to read levels
Key numbers
- Median for this date
- 97.00 m0.01 m below the median for this date
- Normal for this date
- 96.89 m – 97.30 m8 years in 10 fall in this range (14 years of records)
- Same day last year
- 96.92 m+0.07 m
- Lowest and highest in 30 days
- 96.88 m – 96.99 m
- Lowest and highest in 12 months
- 96.88 m – 97.33 m
Freshet, ice and paddling
Open-water season is the time for canoe trips and fishing, though rapids change character with every few centimetres of water.
Flood advisories come from the provincial river forecast centre.
Weather at the gauge
Rain in the last 3 days: 7.7 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Other gauges on the Steepbank River
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Steepbank River below North Steepbank RiverRiver gauge, Steepbank River | 97.71 m | Normal | +0.02 m | 22 km |
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Beaver River above SyncrudeRiver gauge, Beaver River | 2.87 m | Very high | ±0 | 11 km |
| East Jackpine Creek near the 1300 Ft ContourRiver gauge, East Jackpine Creek | 100.11 m | Normal | ±0 | 15 km |
| Muskeg River near Fort MackayRiver gauge, Muskeg River | 1.54 m | High | ±0 | 24 km |
| Athabasca River below Fort McMurrayRiver gauge, Athabasca River | 2.26 m | Very high | −0.05 m | 24 km |
| Jackpine Creek at Canterra RoadRiver gauge, Jackpine Creek | 0.40 m³/s | Normal | +0.02 m³/s | 27 km |
| Mackay River near Fort MackayRiver gauge, Mackay River | 1.84 m | High | +0.03 m | 29 km |
| Mackay River at Petro-Canada BridgeRiver gauge, Mackay River | 96.58 m | Normal | +0.01 m | 30 km |
| Dover River near the MouthRiver gauge, Dover River | 97.61 m | Normal | −0.01 m | 31 km |
Questions and answers
Is the Steepbank River near Fort McMurray higher than last year?
Yes, it is 0.07 m higher than on the same day last year, when the reading was 96.92 m.
What is a normal level for the Steepbank River near Fort McMurray in mid-October?
The median for mid-October is 97.00 m. In 8 years out of 10 the reading falls between 96.89 m and 97.30 m, based on 14 years of records.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 96.99 m on the gauge does not mean the water is that deep.
What is the water level of Steepbank River near Fort McMurray today?
On Oct 19, 2026, 06:15 AM MDT, the water level was 96.99 m. Up 0.01 m over the last 24 hours.
Is Steepbank River near Fort McMurray rising or falling?
Up 0.01 m over the last 24 hours. Up 0.07 m over the last 7 days.
Is the level of Steepbank River near Fort McMurray normal?
Normal for mid-October. Compared with 14 years of daily readings for this time of year.
How often is this data updated?
Environment and Climate Change Canada – Water Survey of Canada publishes a new reading every hour. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment and Climate Change Canada – Water Survey of Canada
- Station code
eccc:07DA006(Agency page)- Coordinates
56.99934, -111.40700(WGS84)- Vertical datum
- station datum (assumed datum)
- Update interval
- every hour
- Licence
- Open Government Licence – Canada. Contains information licensed under the Open Government Licence – Canada
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 96.99 m | 2026-10-19 12:15 | Provisional |
| Flow | 2.28 m³/s | 2026-10-19 12:15 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment and Climate Change Canada – Water Survey of Canada: Steepbank River near Fort McMurray (eccc:07DA006). Accessed October 19, 2026 via Nivelmap, https://nivelmap.com/en/canada/alberta/steepbank-river-near-fort-mcmurray
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer