Nivelmap
EN

Kilmona Bridge water level

River gauge, Martin, Cork, Ireland

Directions

Right now

Below the normal range

Water level

0.28m Down 0.01 m over the last 24 hours

1 2 Highest onrecord 2.47 m

History

History
0.290.30mOct 16Oct 16Oct 16Oct 17Oct 17Bottom of normal range0.290.30mOct 16Oct 16Oct 17Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

The Martin at Kilmona Bridge is running below normal at 0.28 m.

The usual range here runs from 0.31 m to 0.65 m.

It has dropped 0.01 m over the past 24 hours. Without real rain upstream, that is unlikely to change quickly. In the last month it has stayed between 0.28 m and 0.30 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.31 m – 0.65 m
Highest on record
2.47 m

Fishing and paddling

At low levels, many rivers become a walk-and-paddle trip. Fish hold in deeper pools and spook easily.

Flood alerts and warnings come from the OPW and Met Éireann.

Weather at the gauge

Rain in the last 3 days: 12 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 12° 3° – Wind 14 km/h
18 Sun 13° 4° – Wind 10 km/h
19 Mon 12° 3° 0.2 mm, 33% Wind 13 km/h
20 Tue 14° 8° 11 mm, 63% Wind 29 km/h
21 Wed 11° 7° 0.8 mm, 45% Wind 28 km/h
22 Thu 13° 7° 0.6 mm, 78% Wind 17 km/h
23 Fri 10° 6° 7.8 mm, 70% Wind 31 km/h

Forecast: Open-Meteo

Sunrise 08:03 AM Sunset 06:38 PM Daylight 10 hr, 36 min First quarter 42%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Bawnafinny BridgeRiver gauge, Blarney 0.33 m Normal −0.01 m 6.6 km
Gothic BridgeRiver gauge, Blarney 0.12 m Low −0.02 m 7.1 km
MuskerryRiver gauge, Shournagh 0.16 m Normal −0.02 m 8.4 km
Glennamought BridgeRiver gauge, Glen Tributary 0.40 m Normal −0.01 m 10 km
Jordans BridgeRiver gauge, Clydagh (Cork) 0.45 m Normal −0.01 m 10 km
Inniscarra HeadraceReservoir, Lee 46.54 m Normal −0.13 m 11 km
Inniscarra TailraceRiver gauge, Lee 0.31 m Normal −1.26 m 11 km
Blackpool Retail ParkRiver gauge, Bride (Cork) 0.15 m Normal −0.01 m 11 km

Questions and answers

What is the typical range for the Martin at Kilmona Bridge?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.31 m to 0.65 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.28 m on the gauge does not mean the water is that deep.

What is the water level of Kilmona Bridge today?

On 17 Oct 2026, 18:30 GMT+1, the water level was 0.28 m. Down 0.01 m over the last 24 hours.

Is Kilmona Bridge rising or falling?

Down 0.01 m over the last 24 hours.

Is the level of Kilmona Bridge normal?

Below the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Kilmona Bridge?

The highest level on record is 2.47 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:19044 (Agency page)
Coordinates
51.98953, -8.58857 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
74.168 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.28 m 2026-10-17 17:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Kilmona Bridge (opw:19044). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/cork/kilmona-bridge

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.