Nivelmap
EN

Cuppanagh water level

Lake, L. Gara, Sligo, Ireland

Directions

Right now

Within the normal range

Water level

1.08m Up 0.14 m over the last 24 hours

0 1 2 3 Highest onrecord 3.40 m

History

History
1.001.05mOct 16Oct 16Oct 16Oct 17Oct 171.001.05mOct 16Oct 16Oct 17
Water level Top of normal rangeBottom of normal range

What this means

The water level at Cuppanagh reads 1.08 m, about where it usually sits at this time of year.

The usual range here runs from 0.31 m to 2.04 m.

It is on the way up, by 0.14 m over the past 24 hours. The 30-day range is 0.94 m – 1.08 m.

Lakes and reservoirs often sit lower in autumn after a summer of evaporation and use, and recover with the winter rain.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.31 m – 2.04 m
Highest on record
3.40 m

Boating and fishing at Cuppanagh

A lake in its usual range is what most ramps, docks and swimming areas are built for.

If you swim, choose a spot with an easy way out and someone watching.

Weather at the gauge

Rain in the last 3 days: 20 mm.

17 Sat 12° 0° – Wind 10 km/h
18 Sun 12° 3° – Wind 10 km/h
19 Mon 12° 2° – Wind 17 km/h
20 Tue 14° 7° 12 mm, 71% Wind 31 km/h
21 Wed 10° 6° 3.4 mm, 66% Wind 29 km/h
22 Thu 10° 3° 2.4 mm, 78% Wind 15 km/h
23 Fri 10° 4° 1.0 mm, 75% Wind 28 km/h

Forecast: Open-Meteo

Sunrise 08:05 AM Sunset 06:34 PM Daylight 10 hr, 29 min First quarter 42%

Map

Other gauges on the L. Gara

Gauge Level Compared with normal 24 hours Distance
LomcloonLake, L. Gara 1.31 m Normal −0.03 m 5.5 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Boyle Abbey BridgeRiver gauge, Boyle 0.50 m Normal +0.04 m 7.3 km
Banada Bridge LungEstuary gauge, Lung 1.34 m Normal −0.24 m 12 km
BallynaryLake, L. Arrow 0.89 m Normal ±0 13 km
Big BridgeRiver gauge, Owenmore (Sligo) 2.07 m High −0.06 m 13 km
Carrick-On-ShannonRiver gauge, Shannon 1.61 m Normal −0.01 m 20 km
Templehouse DemesneLake, L. Templehouse 1.28 m Normal +0.12 m 21 km
BallynacarrowRiver gauge, Owenmore (Sligo) 1.11 m Normal +0.07 m 23 km
Jamestown Weir D/SRiver gauge, Shannon 1.02 m Normal +0.05 m 25 km

Questions and answers

What is the typical range for Cuppanagh?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.31 m to 2.04 m for this gauge.

What is the water level of Cuppanagh today?

On 17 Oct 2026, 18:30 GMT+1, the water level was 1.08 m. Up 0.14 m over the last 24 hours.

Is Cuppanagh rising or falling?

Up 0.14 m over the last 24 hours.

Is the level of Cuppanagh normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Cuppanagh?

The highest level on record is 3.40 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Office of Public Works (waterlevel.ie), the official operator of this gauge, and are published under CC BY 4.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Office of Public Works (waterlevel.ie)
Station code
opw:26075 (Agency page)
Coordinates
53.95833, -8.40619 (WGS84)
Vertical datum
OD Malin Head OSGM15
Gauge zero
62.555 m
Update interval
every 15 minutes
Licence
CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

ParameterLast valueTime (UTC)Quality
Water level 1.08 m 2026-10-17 17:30 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Office of Public Works (waterlevel.ie): Cuppanagh (opw:26075). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/ireland/sligo/cuppanagh

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.