Mullingar Pump Hse water level

Name: Mullingar Pump Hse water level (Office of Public Works (waterlevel.ie))
Creator: Office of Public Works (waterlevel.ie)
License: https://creativecommons.org/licenses/by/4.0/

River gauge, Brosna, Westmeath, Ireland

Directions

Within the normal range

Water level

0.23m Steady over the last 24 hours

Measured 18 Oct 2026, 00:00 GMT+1 (19 hours ago)

History

Not enough readings for a chart yet. History builds up with every update.

What this means

The gauge at Mullingar Pump Hse reads 0.23 m, a normal level.

The usual range here runs from 0.20 m to 0.43 m.

It has barely moved over the past 24 hours.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range: 0.20 m – 0.43 m
Highest on record: 1.05 m

On the river at Mullingar Pump Hse

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the OPW and Met Éireann.

Weather at the gauge

Rain in the last 3 days: 8.9 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 12° 0° – Wind 9 km/h

19 Mon 11° 1° 0.1 mm Wind 13 km/h

20 Tue 13° 6° 7.5 mm, 46% Wind 28 km/h

21 Wed 10° 6° 7.3 mm, 58% Wind 26 km/h

22 Thu 10° 5° 1.4 mm, 61% Wind 20 km/h

23 Fri 8° 3° – Wind 25 km/h

24 Sat 10° 6° 15 mm, 61% Wind 35 km/h

Forecast: Open-Meteo

Sunrise 08:02 AM Sunset 06:28 PM Daylight 10 hr, 26 min First quarter 51%

Map

Other gauges on the Brosna

Gauge	Level	Compared with normal	24 hours	Distance
Culleen Fish FarmRiver gauge, Brosna	0.16 m	Normal	±0	2.6 km
PollaghRiver gauge, Brosna	0.58 m	Normal	−0.06 m	37 km
FerbaneRiver gauge, Brosna	0.96 m	Normal	−0.06 m	43 km
MoystownRiver gauge, Brosna	0.54 m	Normal	−0.05 m	51 km

Nearby gauges

Gauge	Level	Compared with normal	24 hours	Distance
Scragh BogRiver gauge, Stream	0.49 m	Normal	−0.01 m	6.7 km
Lough DerravaraghLake, L. Derravaragh	1.49 m	Normal	−0.01 m	9.5 km
BallinalackRiver gauge, Inny	0.96 m	Normal	−0.02 m	15 km
Tinker's BridgeRiver gauge, Stream	0.04 m	Normal	±0	20 km
KillyonRiver gauge, Deel (Raharney)	0.38 m	Normal	±0	24 km
Boyne AqueductRiver gauge, Boyne	0.54 m	Normal	−0.01 m	26 km
CastlerickardRiver gauge, Blackwater (Enfield)	0.62 m	Normal	−0.01 m	28 km
BallymahonRiver gauge, Inny	1.03 m	Normal	−0.02 m	28 km

Questions and answers

What is the typical range for the Brosna at Mullingar Pump Hse?

The Office of Public Works (waterlevel.ie) gives a typical range of 0.20 m to 0.43 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.23 m on the gauge does not mean the water is that deep.

What is the water level of Mullingar Pump Hse today?

On 18 Oct 2026, 00:00 GMT+1, the water level was 0.23 m. Steady over the last 24 hours.

Is Mullingar Pump Hse rising or falling?

Steady over the last 24 hours.

Is the level of Mullingar Pump Hse normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Mullingar Pump Hse?

The highest level on record is 1.05 m.

How often is this data updated?

The Office of Public Works (waterlevel.ie) publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads

Operator: Office of Public Works (waterlevel.ie)
Station code: opw:25050 (Agency page)
Coordinates: 53.52788, -7.33481 (WGS84)
Vertical datum: OD Malin Head OSGM15
Gauge zero: 88.398 m
Update interval: every 15 minutes
Licence: CC BY 4.0. Contains Irish Public Sector Information licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence (source waterlevel.ie - provided by the Office of Public Works)

Published series

Parameter	Last value	Time (UTC)	Quality
Water level	0.23 m	2026-10-17 23:00	Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

<iframe src="https://nivelmap.com/embed/23937?lang=en" width="360" height="230" style="border:0;max-width:100%" loading="lazy" title="Mullingar Pump Hse water level"></iframe>

How to cite

Office of Public Works (waterlevel.ie): Mullingar Pump Hse (opw:25050). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/ireland/westmeath/mullingar-pump-hse

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.

Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer