Nivelmap
EN

Jubilee River at Slough Road Weir water level

River gauge, Berkshire, United Kingdom

Directions

Right now

Latest reading

Surface elevation

18.52m Up 0.02 m over the last 24 hours

18 20

History

History
18.4918.5018.5118.52mOct 14Oct 15Oct 17Oct 19Oct 2118.4918.5018.5118.52mOct 14Oct 17Oct 21
18.5018.52mSep 21Sep 28Oct 6Oct 13Oct 2118.5018.52mSep 21Oct 6Oct 21
Surface elevation

What this means

The Environment Agency has Jubilee River at Slough Road Weir at 18.52 m. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It is on the way up, by 0.02 m over the past 24 hours. The 30-day range is 18.49 m – 18.52 m.

Over the past seven days the change adds up to +0.02 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
18.49 m – 18.52 m
Lowest and highest in 12 months
18.49 m – 18.50 m

For anglers and canoeists

Without a reference range, compare today with the chart: a sharp rise usually means coloured water.

Many angling and canoe clubs check gauges like this one before heading out.

Weather at the gauge

Rain in the last 3 days: 2.7 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 14° 8° 2.6 mm, 83% Wind 20 km/h
19 Mon 15° 9° 0.7 mm, 81% Wind 16 km/h
20 Tue 13° 11° 11 mm, 63% Wind 8 km/h
21 Wed 14° 8° 3.3 mm, 44% Wind 25 km/h
22 Thu 14° 6° 2.0 mm, 53% Wind 14 km/h
23 Fri 11° 8° 38 mm, 78% Wind 32 km/h
24 Sat 10° 4° – Wind 22 km/h

Forecast: Open-Meteo

Sunrise 07:37 AM Sunset 05:59 PM Daylight 10 hr, 22 min Waxing gibbous 74%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Romney LockRiver gauge, River Thames 0.22 m High −0.04 m 1.0 km
Windsor ParkRiver gauge, River Thames 3.33 m Normal +0.02 m 2.0 km
Boveney LockRiver gauge, River Thames 0.27 m Normal +0.09 m 2.8 km
Old Windsor LockRiver gauge, River Thames 0.27 m Very high +0.02 m 4.9 km
BrayGroundwater well 17.26 m Low +0.02 m 5.6 km
Horton MillRiver gauge, Colne Brook 0.14 m Normal +0.02 m 6.0 km
Bray LockRiver gauge, River Thames 0.24 m Normal +0.07 m 6.0 km
PoyleRiver gauge, Poyle Channel 1.50 m Normal ±0 6.8 km

Questions and answers

Is Jubilee River at Slough Road Weir really 18.52 m deep?

No. 18.52 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Jubilee River at Slough Road Weir today?

On 21 Oct 2026, 05:45 BST, the surface elevation was 18.52 m. Up 0.02 m over the last 24 hours.

Is Jubilee River at Slough Road Weir rising or falling?

Up 0.02 m over the last 24 hours. Up 0.02 m over the last 7 days.

Is the level of Jubilee River at Slough Road Weir normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:2747TH
Coordinates
51.50104, -0.60428 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 18.52 m 2026-10-21 04:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Jubilee River at Slough Road Weir (ea:2747TH). Accessed October 21, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/berkshire/jubilee-river-at-slough-road-weir

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.