Nivelmap
EN

Pillaton water level

River gauge, River Lynher, Cornwall, United Kingdom

Directions

Right now

Within the normal range

Water level

0.23m Steady over the last 24 hours

0 1 2 Highest onrecord 2.44 m Lowest on record 0.14 m

History

History
0.200.220.240.26mOct 10Oct 11Oct 13Oct 15Oct 17Bottom of normal range0.200.220.240.26mOct 10Oct 13Oct 17Bottom of normal range
0.200.250.300.35mSep 17Sep 24Oct 2Oct 9Oct 17Bottom of normal range0.200.250.300.35mSep 17Oct 2Oct 17Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Pillaton reads 0.23 m, a normal level.

The usual range here runs from 0.22 m to 1.50 m.

The level has held steady over the past 24 hours. Over the past 30 days it has moved between 0.18 m and 0.34 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.22 m – 1.50 m
Lowest and highest in 30 days
0.18 m – 0.34 m
Highest on record
2.44 mDecember 19, 2020
Lowest on record
0.14 mAugust 2, 1989

On the river at Pillaton

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 3.8 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

17 Sat 14° 6° – Wind 12 km/h
18 Sun 13° 5° – Wind 14 km/h
19 Mon 11° 7° 2.4 mm, 54% Wind 14 km/h
20 Tue 14° 7° 0.9 mm, 49% Wind 10 km/h
21 Wed 12° 9° 5.1 mm, 65% Wind 40 km/h
22 Thu 14° 9° 1.8 mm, 71% Wind 21 km/h
23 Fri 14° 10° 23 mm, 85% Wind 40 km/h

Forecast: Open-Meteo

Sunrise 07:43 AM Sunset 06:23 PM Daylight 10 hr, 40 min First quarter 37%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
TidefordRiver gauge, River Tiddy 0.06 m Very low ±0 3.8 km
TrebrownbridgeRiver gauge, River Seaton 0.12 m Very low −0.02 m 7.5 km
GunnislakeRiver gauge, River Tamar 0.41 m Low +0.05 m 12 km
LudbrookRiver gauge, River Tavy 0.22 m Normal +0.02 m 12 km
BealsmillRiver gauge, River Inny 0.40 m Low +0.01 m 15 km
CarnwoodRiver gauge, River Plym 0.24 m Very low +0.01 m 15 km
TrekeivestepsRiver gauge, River Fowey 0.25 m Very low −0.03 m 16 km
HorrabridgeRiver gauge, River Walkham 0.23 m Very low −0.01 m 16 km

Questions and answers

What is the typical range for the River Lynher at Pillaton?

The Environment Agency gives a typical range of 0.22 m to 1.50 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.23 m on the gauge does not mean the water is that deep.

What is the water level of Pillaton today?

On 17 Oct 2026, 05:00 BST, the water level was 0.23 m. Steady over the last 24 hours.

Is Pillaton rising or falling?

Steady over the last 24 hours. Up 0.02 m over the last 7 days.

Is the level of Pillaton normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Pillaton?

The highest level on record is 2.44 m on December 19, 2020. The lowest is 0.14 m on August 2, 1989.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:47136 (Agency page)
Coordinates
50.44015, -4.29880 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.23 m 2026-10-17 04:00 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Pillaton (ea:47136). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/cornwall/pillaton

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.