Canada
United States
Belgium
France
Ireland
Netherlands
United Kingdom
Austria
Czechia
Germany
Poland
Slovenia
Switzerland
Italy
Spain
Türkiye
Denmark
Finland
Norway
SwedenBelper water level
River gauge, Coppice Brook, Derbyshire, United Kingdom
Right now
Within the normal range
Water level
History
What this means
Coppice Brook at Belper is at 0.18 m, within its typical range.
The usual range here runs from 0.09 m to 0.90 m.
It has dropped 0.01 m over the past 24 hours. In the last month it has stayed between 0.08 m and 0.44 m.
Autumn rain usually starts to lift rivers again after the summer low.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- 0.09 m – 0.90 m
- Lowest and highest in 30 days
- 0.08 m – 0.44 m
- Highest on record
- 1.44 mOctober 20, 2023
- Lowest on record
- 0.08 mAugust 31, 2022
Fishing and paddling
Paddlers and anglers can expect the river much as they know it, though a heavy shower upstream can change that within hours.
Flood alerts and warnings come from the Environment Agency.
Weather at the gauge
Rain in the last 3 days: 5.2 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Smithy HousesRiver gauge, Bottle Brook | 0.28 m | Lowest on record | −0.02 m | 2.4 km |
| Wingfield ParkRiver gauge, River Amber | 0.27 m | Normal | ±0 | 5.0 km |
| DuffieldRiver gauge, River Ecclesbourne | 0.16 m | Low | −0.04 m | 5.6 km |
| EastwoodRiver gauge, Beauvale Brook | 0.23 m | Normal | −0.02 m | 10 km |
| Shipley GateRiver gauge, River Erewash | 1.27 m | Normal | +0.09 m | 10 km |
| PinxtonRiver gauge, River Erewash | 0.06 m | Very low | −0.02 m | 11 km |
| Derby CityRiver gauge, River Derwent | 0.56 m | Low | −0.04 m | 11 km |
| Derby Bridge StreetRiver gauge, Markeaton Brook | 0.80 m | Normal | −0.05 m | 12 km |
Questions and answers
What is the typical range for Coppice Brook at Belper?
The Environment Agency gives a typical range of 0.09 m to 0.90 m for this gauge.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 0.18 m on the gauge does not mean the water is that deep.
What is the water level of Belper today?
On 17 Oct 2026, 15:00 BST, the water level was 0.18 m. Down 0.01 m over the last 24 hours.
Is Belper rising or falling?
Down 0.01 m over the last 24 hours. Down 0.19 m over the last 7 days.
Is the level of Belper normal?
Within the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Belper?
The highest level on record is 1.44 m on October 20, 2023. The lowest is 0.08 m on August 31, 2022.
How often is this data updated?
The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment Agency
- Station code
ea:4684(Agency page)- Coordinates
53.02900, -1.45835(WGS84)- Vertical datum
- station datum
- Update interval
- every 15 minutes
- Licence
- Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Water level | 0.18 m | 2026-10-17 14:00 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment Agency: Belper (ea:4684). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/derbyshire/belper
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer