Nivelmap
EN

Hayne Bridge water level

River gauge, River Thrushel, Devon, United Kingdom

Directions

Right now

Within the normal range

Water level

0.16m

0 1 2 Highest onrecord 2.28 m Lowest on record 0.05 m
Water level: 0.16 m. Within the normal range.

History

Not enough readings for a chart yet. History builds up with every update.

What this means

The gauge at Hayne Bridge reads 0.16 m, a normal level.

The usual range here runs from 0.11 m to 2.00 m.

Over the past 30 days it has moved between 0.16 m and 0.17 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.11 m – 2.00 m
Highest on record
2.28 mNovember 25, 2006
Lowest on record
0.05 mSeptember 19, 1996

On the river at Hayne Bridge

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency, Natural Resources Wales or SEPA, depending on where you are.

Weather at the gauge

Rain in the last 3 days: 3.7 mm. Rain upstream usually reaches a river gauge after hours to days.

17 Sat 13° 4° – Wind 14 km/h
18 Sun 12° 2° – Wind 14 km/h
19 Mon 11° 6° 3.0 mm, 39% Wind 17 km/h
20 Tue 13° 7° 2.4 mm, 35% Wind 13 km/h
21 Wed 11° 8° 7.3 mm, 69% Wind 42 km/h
22 Thu 12° 8° 4.1 mm, 67% Wind 19 km/h
23 Fri 13° 9° 22 mm, 83% Wind 42 km/h

Forecast: Open-Meteo

Sunrise 07:43 AM Sunset 06:23 PM Daylight 10h 40m First quarter 36 %

Map

Other gauges on the River Thrushel

Gauge Level Compared with normal 24 hours Distance
TinhayRiver gauge, River Thrushel 0.32 m Normal +0.01 m 2.2 km

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Lifton ParkRiver gauge, River Lyd 0.52 m Normal 3.7 km
Polson BridgeRiver gauge, River Tamar 0.41 m Normal +0.12 m 6.6 km
WerringtonRiver gauge, River Ottery 0.13 m Very low +0.02 m 7.9 km
Greystone BridgeRiver gauge, River Tamar 0.21 m Normal +0.07 m 7.9 km
GermansweekRiver gauge, River Wolf 0.09 m Very low 0.00 m 8.1 km
LauncestonRiver gauge, River Kensey 0.12 m Normal 0.00 m 8.7 km
BealsmillRiver gauge, River Inny 0.40 m Low +0.02 m 11 km
TruscottRiver gauge, River Kensey 0.43 m Low 0.00 m 12 km

Questions and answers

What is the record level at Hayne Bridge?

The highest reading on record is 2.28 m (November 25, 2006). The lowest is 0.05 m (September 19, 1996).

How often is Hayne Bridge updated?

Several times an hour. New readings from Environment Agency appear here as they arrive. Latest: Oct 17, 2026, 03:15 AM GMT+1.

What is the water level of Hayne Bridge today?

On Oct 17, 2026, 03:15 AM GMT+1, the water level was 0.16 m. Normal.

Is the level of Hayne Bridge normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Hayne Bridge?

The highest level on record is 2.28 m on November 25, 2006. The lowest is 0.05 m on September 19, 1996.

How often is this data updated?

Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:47124 (Agency page)
Coordinates
50.65803, -4.24188 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level stage 0.16 m 2026-10-17 02:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Hayne Bridge (ea:47124). Accessed October 17, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/devon/hayne-bridge

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.