Bransholme Great Culvert Pumping Station water level
River gauge, Holderness Drain, East Riding of Yorkshire, United Kingdom
Right now
Within the normal range
Surface elevation
History
What this means
Water levels are unremarkable at Bransholme Great Culvert Pumping Station, where the gauge shows −2.08 m.
The usual range here runs from −2.53 m to −0.60 m.
It is on the way up, by 0.17 m over the past 24 hours. The 30-day range is −2.64 m – −1.60 m.
Autumn rain usually starts to lift rivers again after the summer low.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- −2.53 m – −0.60 m
- Lowest and highest in 30 days
- −2.64 m – −1.60 m
- Lowest and highest in 12 months
- −2.38 m – −1.62 m
- Highest on record
- 0.83 mSeptember 16, 2018
- Lowest on record
- −2.62 mNovember 29, 2011
For anglers and canoeists
This is an ordinary level for the river: most put-ins, beats and weirs behave as they usually do.
Many angling and canoe clubs check gauges like this one before heading out.
About the Holderness Drain
Holderness Drain is the main feature of a land drainage scheme for the area of Holderness to the east of the River Hull in the East Riding of Yorkshire, England. Construction began in 1764, and several notable civil engineers were involved with the scheme over the years. Despite the high costs of the initial scheme, it was not particularly successful, because of the refusal of the ship owners of Hull to allow an outlet at Marfleet. They insisted that the water be discharged into the River Hull to keep the channel free of silt. Following a period of agricultural depression and the building of new docks in the early 1800s, an outlet at Marfleet was finally authorised in 1832. A high level system still fed upland water to the Hull, but the low level system discharged into the Humber, where levels were considerably lower. Following the success of steam pumping on the Beverley and Barmston Drain, the trustees looked at such a possibility for the Holderness Drain, but the development of the Alexandra Dock in the 1880s and then the King George V Dock in 1913 provided a solution, as the docks were topped up with water pumped from the drain, to lessen the ingress of silt-laden water.
Text and image from Wikipedia and Wikimedia Commons, licensed under CC BY-SA.
Weather at the gauge
Rain in the last 3 days: 6.3 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Other gauges on the Holderness Drain
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| East Hull Hedon RoadRiver gauge, Holderness Drain | −0.96 m | No reference yet | −0.08 m | 6.5 km |
| Tickton PSRiver gauge, Holderness Drain | −1.93 m | No reference yet | +0.02 m | 8.0 km |
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| Stoneferry BridgeRiver gauge, River Hull | 0.50 m | Normal | +0.03 m | 4.4 km |
| North Hull National AvenueRiver gauge, Setting Dyke | 0.32 m | Normal | +0.02 m | 6.9 km |
| Beverley ShipyardRiver gauge, River Hull | 1.29 m | Very low | +0.05 m | 7.3 km |
| Cottingham HallgateRiver gauge, Broadlane Beck | 0.08 m | Normal | ±0 | 7.8 km |
| North Hull Birdsall AvenueRiver gauge, Setting Dyke | 0.13 m | Normal | +0.01 m | 8.2 km |
| Hull Hessle Astral CloseRiver gauge, Western Drain | 0.36 m | Normal | +0.03 m | 11 km |
| Hessle Western DrainRiver gauge, Western Drain | 0.07 m | Normal | +0.02 m | 11 km |
| Thorngumbald Pumping StationRiver gauge, Thorngumbald Drain | 0.31 m | High | ±0 | 12 km |
Questions and answers
What is the typical range for Holderness Drain at Bransholme Great Culvert Pumping Station?
The Environment Agency gives a typical range of −2.53 m to −0.60 m for this gauge.
Is Bransholme Great Culvert Pumping Station really −2.08 m deep?
No. −2.08 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.
What is the water level of Bransholme Great Culvert Pumping Station today?
On 21 Oct 2026, 08:00 BST, the surface elevation was −2.08 m. Up 0.17 m over the last 24 hours.
Is Bransholme Great Culvert Pumping Station rising or falling?
Up 0.17 m over the last 24 hours. Up 0.15 m over the last 7 days.
Is the level of Bransholme Great Culvert Pumping Station normal?
Within the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Bransholme Great Culvert Pumping Station?
The highest level on record is 0.83 m on September 16, 2018. The lowest is −2.62 m on November 29, 2011.
How often is this data updated?
The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment Agency
- Station code
ea:L3243(Agency page)- Coordinates
53.80470, -0.30917(WGS84)- Vertical datum
- ODN
- Update interval
- every 15 minutes
- Licence
- Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Surface elevation | −2.08 m | 2026-10-21 07:00 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment Agency: Bransholme Great Culvert Pumping Station (ea:L3243). Accessed October 21, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/east-riding-of-yorkshire/bransholme-great-culvert-pumping-station
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer