Nivelmap
EN

Uckfield Brookside RL water level

River gauge, East Sussex, United Kingdom

Directions

Right now

Latest reading

Surface elevation

13.77m Steady over the last 24 hours

13 15

History

History
13.7513.8013.8513.90mOct 13Oct 14Oct 16Oct 18Oct 2013.7513.8013.8513.90mOct 13Oct 16Oct 20
13.813.914.0mSep 20Sep 27Oct 5Oct 12Oct 2013.813.914.0mSep 20Oct 5Oct 20
Surface elevation

What this means

The latest river level reported for Uckfield Brookside RL is 13.77 m. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It has barely moved over the past 24 hours. Over the past 30 days it has moved between 13.73 m and 13.99 m.

Over the past seven days the change adds up to 0.00 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
13.73 m – 13.99 m
Lowest and highest in 12 months
13.74 m – 13.79 m

On the river at Uckfield Brookside RL

There is no published typical range for this gauge yet, so anglers and canoeists are best guided by the trend.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 7.2 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

19 Mon 12° 7° 0.5 mm, 41% Wind 12 km/h
20 Tue 15° 6° 4.5 mm, 96% Wind 14 km/h
21 Wed 13° 6° 9.2 mm, 77% Wind 41 km/h
22 Thu 12° 5° 5.4 mm, 91% Wind 27 km/h
23 Fri 13° 8° 22 mm, 98% Wind 55 km/h
24 Sat 13° 6° 7.4 mm, 65% Wind 30 km/h
25 Sun 17° 11° 6.4 mm, 58% Wind 37 km/h

Forecast: Open-Meteo

Sunrise 07:31 AM Sunset 05:59 PM Daylight 10 hr, 28 min First quarter 65%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Uckfield Mill upstreamRiver gauge, River Uck 0.26 m Low −0.01 m 0.9 km
Isfield weirRiver gauge, River Uck 0.15 m Very low ±0 1.9 km
GoldbridgeRiver gauge, River Ouse 0.25 m Very low ±0 3.6 km
BuxtedRiver gauge, River Uck 0.10 m Normal ±0 3.9 km
Anchor GatesRiver gauge, River Ouse 5.94 m Normal +0.01 m 5.4 km
BarcombeRiver gauge, River Ouse 2.53 m Normal ±0 6.7 km
Barcombe GatesRiver gauge, River Ouse 5.29 m Normal ±0 6.7 km
Freshfield BridgeRiver gauge, River Ouse −0.04 m Lowest on record ±0 8.8 km

Questions and answers

Is Uckfield Brookside RL really 13.77 m deep?

No. 13.77 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Uckfield Brookside RL today?

On 20 Oct 2026, 04:45 BST, the surface elevation was 13.77 m. Steady over the last 24 hours.

Is Uckfield Brookside RL rising or falling?

Steady over the last 24 hours. Steady over the last 7 days.

Is the level of Uckfield Brookside RL normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:2702SO
Coordinates
50.96798, 0.08442 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 13.77 m 2026-10-20 03:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Uckfield Brookside RL (ea:2702SO). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/east-sussex/uckfield-brookside-rl

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.