Wardropers water level
River gauge, River Wid, Essex, United Kingdom
Right now
Within the normal range
Water level
History
What this means
The River Wid at Wardropers is at 0.53 m, within its typical range.
The usual range here runs from 0.00 m to 2.06 m.
The level has held steady over the past 24 hours. In the last month it has stayed between 0.39 m and 0.60 m.
Autumn rain usually starts to lift rivers again after the summer low.
Compared with the normal range the agency publishes for this gauge. How to read levels
Key numbers
- Normal range
- 0.00 m – 2.06 m
- Highest on record
- 2.34 mApril 29, 2012
- Lowest on record
- −0.70 mSeptember 12, 2006
Fishing and paddling
Paddlers and anglers can expect the river much as they know it, though a heavy shower upstream can change that within hours.
Flood alerts and warnings come from the Environment Agency.
About the River Wid
River Wid is a river in the county of Essex, England, a tributary of the River Can. It runs to the south of Chelmsford, following the A1016, previously the A12 out of Chelmsford at Widford.
Text and image from Wikipedia and Wikimedia Commons, licensed under CC BY-SA.
Weather at the gauge
Rain in the last 3 days: 1.4 mm. Rain that falls upstream can take hours or days to show up at a river gauge.
Forecast: Open-Meteo
Map
Other gauges on the River Wid
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| MountnessingRiver gauge, River Wid | 0.38 m | Normal | +0.01 m | 3.5 km |
| WrittleRiver gauge, River Wid | 0.13 m | Normal | −0.01 m | 9.7 km |
Nearby gauges
| Gauge | Level | Compared with normal | 24 hours | Distance |
|---|---|---|---|---|
| WickfordRiver gauge, River Crouch | 0.15 m | Normal | +0.04 m | 9.5 km |
| Beach's MillRiver gauge, River Can | 0.25 m | Low | −0.02 m | 11 km |
| Harold ParkRiver gauge, River Ingrebourne | 0.98 m | Normal | +0.01 m | 11 km |
| SpringfieldRiver gauge, River Chelmer | 0.12 m | Low | ±0 | 12 km |
| High OngarRiver gauge, River Roding | 0.05 m | Normal | ±0 | 12 km |
| Chipping OngarRiver gauge, Cripsey Brook | 0.11 m | Normal | −0.01 m | 13 km |
| Sandon BridgeRiver gauge, Sandon Brook | 0.06 m | Very low | ±0 | 13 km |
| Shonks Mill BridgeRiver gauge, River Roding | 0.06 m | Lowest on record | ±0 | 13 km |
Questions and answers
What is the typical range for the River Wid at Wardropers?
The Environment Agency gives a typical range of 0.00 m to 2.06 m for this gauge.
Is the river level the same as the depth of the water?
No. The reading is measured from a fixed zero mark at the gauge, so 0.53 m on the gauge does not mean the water is that deep.
What is the water level of Wardropers today?
On 18 Oct 2026, 20:15 BST, the water level was 0.53 m. Steady over the last 24 hours.
Is Wardropers rising or falling?
Steady over the last 24 hours.
Is the level of Wardropers normal?
Within the normal range. Compared with the normal range the agency publishes for this gauge.
What is the highest water level ever recorded at Wardropers?
The highest level on record is 2.34 m on April 29, 2012. The lowest is −0.70 m on September 12, 2006.
How often is this data updated?
The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.
For specialists
Station codes, datum, parameters, data quality and downloads
- Operator
- Environment Agency
- Station code
ea:E27675(Agency page)- Coordinates
51.64488, 0.39650(WGS84)- Vertical datum
- station datum
- Update interval
- every 15 minutes
- Licence
- Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0
Published series
| Parameter | Last value | Time (UTC) | Quality |
|---|---|---|---|
| Surface elevation | – | – | – |
| Water level | 0.53 m | 2026-10-18 19:15 | Provisional |
Download
Embed this gauge
Add a live card for this gauge to your website. It updates on its own and links back here.
How to cite
Environment Agency: Wardropers (ea:E27675). Accessed October 18, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/essex/wardropers
How we check values
Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.
Readings are provisional, can be delayed or wrong and are not a flood warning. Read the disclaimer