Nivelmap
EN

Filton Southmead Road water level

River gauge, River Trym, Gloucestershire, United Kingdom

Directions

Right now

Within the normal range

Water level

0.05m Up 0.03 m over the last 24 hours

0.0 0.3 0.5 Highest onrecord 0.32 m Lowest on record 0.00 m

History

History
0.020.040.06mOct 16Oct 17Oct 18Oct 19Oct 20Bottom of normal range0.020.040.06mOct 16Oct 18Oct 20Bottom of normal range
Water level Top of normal rangeBottom of normal range

What this means

The gauge at Filton Southmead Road reads 0.05 m, a normal level.

The usual range here runs from 0.01 m to 0.50 m.

The water is rising: up 0.03 m over the past 24 hours. Over the past 30 days it has moved between 0.01 m and 0.06 m.

Autumn rain usually starts to lift rivers again after the summer low.

Compared with the normal range the agency publishes for this gauge. How to read levels

Key numbers

Normal range
0.01 m – 0.50 m
Highest on record
0.32 mDecember 4, 2023
Lowest on record
0.00 mMay 9, 2022

On the river at Filton Southmead Road

A level in the typical range is usually good news for both anglers and canoeists, but conditions can change quickly after rain in the hills.

Flood warnings for the area come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 4.5 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 12° 5° 0.1 mm, 21% Wind 20 km/h
19 Mon 14° 8° 5.1 mm, 90% Wind 20 km/h
20 Tue 11° 6° 2.1 mm, 82% Wind 8 km/h
21 Wed 13° 6° 4.5 mm, 50% Wind 25 km/h
22 Thu 14° 6° 1.6 mm, 70% Wind 17 km/h
23 Fri 9° 6° 18 mm, 82% Wind 30 km/h
24 Sat 10° 5° 2.7 mm, 60% Wind 25 km/h

Forecast: Open-Meteo

Sunrise 07:43 AM Sunset 06:09 PM Daylight 10 hr, 26 min First quarter 66%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Cribbs Causeway ReservoirRiver gauge 42.68 m High +0.05 m 2.5 km
EastvilleRiver gauge, Bristol Frome 7.56 m Normal +0.03 m 4.1 km
FrenchayRiver gauge, Bristol Frome 0.27 m Low +0.01 m 4.6 km
Bradley BridgeRiver gauge, Bradley Brook 0.02 m Normal +0.01 m 5.0 km
Bristol Harbour Passage StreetRiver gauge, Bristol Frome 6.16 m Low ±0 5.6 km
Bristol Netham LockRiver gauge, River Avon 6.10 m Normal ±0 6.3 km
Netham WeirRiver gauge, River Avon 0.26 m Normal ±0 6.4 km
Markham BrookRiver gauge 5.30 m Very low ±0 7.2 km

Questions and answers

What is the typical range for the River Trym at Filton Southmead Road?

The Environment Agency gives a typical range of 0.01 m to 0.50 m for this gauge.

Is the river level the same as the depth of the water?

No. The reading is measured from a fixed zero mark at the gauge, so 0.05 m on the gauge does not mean the water is that deep.

What is the water level of Filton Southmead Road today?

On 20 Oct 2026, 08:15 BST, the water level was 0.05 m. Up 0.03 m over the last 24 hours.

Is Filton Southmead Road rising or falling?

Up 0.03 m over the last 24 hours.

Is the level of Filton Southmead Road normal?

Within the normal range. Compared with the normal range the agency publishes for this gauge.

What is the highest water level ever recorded at Filton Southmead Road?

The highest level on record is 0.32 m on December 4, 2023. The lowest is 0.00 m on May 9, 2022.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E255 (Agency page)
Coordinates
51.50444, -2.58776 (WGS84)
Vertical datum
station datum
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Water level 0.05 m 2026-10-20 07:15 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Filton Southmead Road (ea:E255). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/gloucestershire/filton-southmead-road

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.