Nivelmap
EN

Ruxley Pits Outfall RL water level

River gauge, Greater London, United Kingdom

Directions

Right now

Latest reading

Surface elevation

28.24m Down 0.02 m over the last 24 hours

25 30

History

History
28.2228.2428.2628.28mOct 13Oct 15Oct 16Oct 18Oct 2028.2228.2428.2628.28mOct 13Oct 16Oct 20
28.2328.2528.28mSep 20Sep 27Oct 5Oct 12Oct 2028.2328.2528.28mSep 20Oct 5Oct 20
Surface elevation

What this means

Ruxley Pits Outfall RL reads 28.24 m as of 20 Oct 2026, 07:45 BST. There is no published reference for this river yet, so we can't say whether that is high or low for the season.

It has dropped 0.02 m over the past 24 hours. In the last month it has stayed between 28.21 m and 28.28 m.

Over the past seven days the change adds up to +0.02 m.

The agency publishes no normal range for this gauge yet, so we show the trend only. How to read levels

Key numbers

Lowest and highest in 30 days
28.21 m – 28.28 m
Lowest and highest in 12 months
28.22 m – 28.26 m

Fishing and paddling

Watch the direction of travel. A rising river after rain behaves very differently from one that is dropping and clearing.

Flood alerts and warnings come from the Environment Agency.

Weather at the gauge

Rain in the last 3 days: 2.9 mm. Rain that falls upstream can take hours or days to show up at a river gauge.

18 Sun 14° 7° 8.5 mm, 92% Wind 17 km/h
19 Mon 14° 8° 1.7 mm, 87% Wind 12 km/h
20 Tue 13° 12° 4.8 mm, 55% Wind 9 km/h
21 Wed 14° 8° 2.7 mm, 40% Wind 23 km/h
22 Thu 14° 6° 1.6 mm, 49% Wind 17 km/h
23 Fri 13° 8° 46 mm, 86% Wind 31 km/h
24 Sat 10° 5° – Wind 20 km/h

Forecast: Open-Meteo

Sunrise 07:32 AM Sunset 05:58 PM Daylight 10 hr, 26 min First quarter 66%

Map

Nearby gauges

Gauge Level Compared with normal 24 hours Distance
Sweeps LaneGroundwater well 43.59 m Normal ±0 2.4 km
Hazelmere RoadRiver gauge, Kyd Brook 0.57 m Low −0.01 m 3.5 km
Gosshill RoadRiver gauge, Kyd Brook 0.53 m Normal ±0 4.3 km
Hall PlaceRiver gauge, River Cray 0.02 m Low ±0 4.5 km
Woodlands RoadRiver gauge, Kyd Brook 1.18 m High −0.01 m 4.5 km
Kydbrook CloseRiver gauge, Kyd Brook 0.41 m Very low −0.01 m 4.5 km
Lower CamdenRiver gauge, Kyd Brook 0.88 m Low −0.01 m 4.8 km
CrayfordRiver gauge, River Cray 0.16 m Normal −0.03 m 5.6 km

Questions and answers

Is Ruxley Pits Outfall RL really 28.24 m deep?

No. 28.24 m is the height of the water surface above sea level (or the agency's vertical datum), not the depth of the water.

What is the water level of Ruxley Pits Outfall RL today?

On 20 Oct 2026, 07:45 BST, the surface elevation was 28.24 m. Down 0.02 m over the last 24 hours.

Is Ruxley Pits Outfall RL rising or falling?

Down 0.02 m over the last 24 hours. Up 0.02 m over the last 7 days.

Is the level of Ruxley Pits Outfall RL normal?

The agency publishes no normal range for this gauge yet, so we show the trend only.

How often is this data updated?

The Environment Agency publishes a new reading every 15 minutes. This page refreshes within minutes of each update.

Where does this data come from?

The values come directly from the Environment Agency, the official operator of this gauge, and are published under the Open Government Licence v3.0. We do not estimate or model live values.

For specialists

Station codes, datum, parameters, data quality and downloads
Operator
Environment Agency
Station code
ea:E15460
Coordinates
51.41297, 0.12032 (WGS84)
Vertical datum
ODN
Update interval
every 15 minutes
Licence
Open Government Licence v3.0. Contains Environment Agency data licensed under the Open Government Licence v3.0

Published series

ParameterLast valueTime (UTC)Quality
Surface elevation 28.24 m 2026-10-20 06:45 Provisional

Download

Embed this gauge

Add a live card for this gauge to your website. It updates on its own and links back here.

How to cite

Environment Agency: Ruxley Pits Outfall RL (ea:E15460). Accessed October 20, 2026 via Nivelmap, https://nivelmap.com/en/united-kingdom/greater-london/ruxley-pits-outfall-rl

How we check values

Each reading is stored as published. We hold back values that jump faster than physically plausible and show the measurement time with every value.